Printable View
iam not sure if any of you have seen this site before http://www.crystalfontz.com/products/index-usb.html
but they have some very good price's on a lot of diffrent lcd's. my question is they have a usb lcd but iam not sure if the SN45G has usb headers on the motherboad, and if not how i would go about hooking it up the wiring and so forth. thanks i know you guys can help :D !!!
Very respectfuly
EViL
i dont know about the SN45G, but with the usb ones there should be no wireing really, all i had to do was plug in usb cable at my lcd, and in back of pc. i would have used one of the headers but the cable with it had the connectors on and i couldnt be arsed enuf to change them
you might want to look at the matrix orbital ones aswell, i havent used CF ones but the mo have nice software :)
this is one i got http://www.matrixorbital.com/pages/p...1&ProductID=48
also
http://forums.bit-tech.net/showthrea...threadid=44604
it would probably be easy enough just to disconnect the header to usb cable that came with your mobo from the backplate and plug that in 'internal' then plug the usb lcd connector into that.... i would think that should be ok.
Nox
Just out of curiosity where did you mount it? looks to big to be mounted in a 3 1/2 bay but i think i would with that. the matrix orbital do they have internal and external usb wire's?
mine wouldnt fit in a 3 1/2 bay, i prefer it in the 5 1/2 though and not many do fit in floppy bays, as 20x2 lcds are a standard size
mine had a usb A to B cable so i have it going thru my case plugging in at the usb ports at back of mobo, the aothers are all in use and these are hard to get to so again, i prefer this way :)
i think iam gonna have to bust out the dremel seeing how the 1 5 1/2 bay have is in use. thanks for the info