Printable View
this is an odd one ;)
when my machine is on its side it will start and all fans will spin etc (no graphics though...)
when it is on its feet (so to speak) it lights up as if ready to go , starts to spin fans but goes nowhere so turns off and refuses to turn on/off until I take away the mains and re-apply them...
any thoughts ?
could he heatsink not be fitted properly ie pulls away from cpu and auto switches off due to temp?, normally ud get to the windows screen before it went off, could be a dodgy agp/pci-e port
smart thinking :DQuote:
Originally Posted by elapse
if I press down on the HSF it boots. if I don't press down it won't boot.
rurroh shaggy!
really lol :mrgreen:Quote:
Originally Posted by atrull
frickin ninja scythe.
I've bent my scythe's retainer clip a bit further away from the motherboard so it should attach better now. does anyone know what detects the lack of contact ? it was runnine perfectly cool..
tossbugger, still doing the same **** :)
I think I need to mount something betwee the side of my case and my cooler lol :(
hire an illigal immagrant to hold it down for you. should be able to pick one up for a few quid a day.
I was hoping pands would come over and sit inside my cupboard.
toss, just tightened up the nuts on backplate - made no difference :(
going to have to get creative I think.
There's nothing that senses that the HS is making contact. Only a sensor that shuts everything down when the CPU overheats (due to there being no heatsink fitted / not making contact).Quote:
Originally Posted by atrull
I think you need to try to "unmod" what you did to the bracket. The Ninja is a swine to install, but works great once you finally get it on there (without bent brackets).
the little bugger is on a flat table, think I need to get yee olde spirit level oot
right, I've put a piece of board between the psu and the hsf, seems to be capable of booting now. :)
not an ideal situation however, eh.