Conroe upgrade dilemma

Hiya, just hoping for a bit of help with my conroe upgrade.

As I am currently running a socket 754 Athlon64 setup, I have accepted the fact that I will have to pretty much buy a whole new set of components. But was just wondering if I would be able to use my current psu. It is an Antec 550W true control. It's never given me any problems in the two and a half years I have had it. And I remember someone using this same psu to power a socket 939 setup even though the motherboard had a 24 pin socket and the psu only containg a 20 pin atx plug.

Would I be able to get along with this psu in a conroe setup until I get my next psu, (probably a seasonic s12 600W) considering I will be running at stock and not overclocking. Oh, and I also should mention I won't be running a high powered pci-express card just yet also due to lack of money and will be using a geforce 6200 pci card for the time being.

Antec make very high quality PSUs, that one should last you a VERY long time and 550W is plenty.

You can get 20 to 24 pin converters if you are worried the motherboard won't like just using 20 pins.

Quote:

---

Originally Posted by DanceswithUnix

You can get 20 to 24 pin converters if you are worried the motherboard won't like just using 20 pins.

---

But i'd never recommend using one of these, just get a decent 24 pin psu.

Nox

I had used my TruePower 550W /w 24pin converter on my Pentium D @ 4Ghz, it will handle Conroe no problem unless you try to force a SLI Setup / X1900XT on the PSU.

Thanks guys for the replies. At least I know that I won't have to shell out £90 for a seasonic just yet.

My Antec Neopower 480w has no issues with my conroe so you should be fine with plenty of juice to spare

Even though Conroe is a processing power upgrade, from a Watts perspective you'll be using less, so you should have no issues.