Screen flickers when my 3.3v drops down to 3.1v and below. Also, this only occured when I installed the new RAM, which is fine as I memtest86'd it.
psu is a hiper 480W
mobo is an asus p4p800 which is at 51C apprently, even though my CPU is at 38C O_o
any advice? thanks
well there are two things which would make sense to try
try a new screen with the current set up..
or try a different PSU
then eliminate the problem, if it contiunes to do so, its probably the mobo (but i doubt it)
{ Sugo SG-01e }{ E4300 @ 2.8ghz }{ Cellshock 2x1gb pc2 8000 }{ X1950XTX sapphire }{ Gigabyte DS2R }
{ HD501LJ samsung 500gb }{ 250GB seagate barracuda }{ Creative X-fi }{ 500W silverstone PSU }{ Sharkoon air cooling }
If it only occured when you installed the new ram, surely it is possible that you could have incompatable ram or a problem with it? Memtest is not 100% accurate.
I installed new RAM 6 months ago and it has been working fine...
Just disable hardware acceleration and it seems to be better now.
did i mention my rails?
Your +3.3V rail is definitely running below 5% regulation. Hiper should have at least 1 year warranty. I'd suggest you RMA it.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote
