Im considering buy one of the new C2D's probably the E6400. I noticed it had a 1066Mhz FSB. When choosing my ram, does that mean i have to buy PC2-8500 (1066Mhz) Ram?. If so, i have really seen much about.
Can anyone help me?
Matt
Printable View
Im considering buy one of the new C2D's probably the E6400. I noticed it had a 1066Mhz FSB. When choosing my ram, does that mean i have to buy PC2-8500 (1066Mhz) Ram?. If so, i have really seen much about.
Can anyone help me?
Matt
no man..you don't, but I have no idea either :(
I think they run DDR2 533/667/800
Wait for one of the uber techy's to point you to the correct ram, for the best value etc.
Scan sell Corsair ram, and would actually be able to tell you what to buy, in their forum too.
http://forums.hexus.net/forumdisplay.php?f=49
Lee knows his sh....his sh....his stuff. He'll be able to answer :)
I'm gonna copy this thread into another forum too, to gain some hits.
pc5400 should be fine. As conroe does actually benifit from wider FSBs quite a bit (unlike a64) when overclocking it is best to use the higher rated RAM but you dont need it at stock.
depends on the board that you have only the 975x chips take the 1066 mhz ram
so it is mostly dependant on the max your board can take if it's a good board then 667 would be a good start and give a little more overclocking potential the the ddr800 stuff does