I noticed that it looks like the HS mounting bracket looks to be attached by 4 screws, 1 in each corner. My Question is this, does it have the normal 2 holes in in the middle so I can attach a custom bracket to fit an XP90?
Thanks in advance.
Printable View
I noticed that it looks like the HS mounting bracket looks to be attached by 4 screws, 1 in each corner. My Question is this, does it have the normal 2 holes in in the middle so I can attach a custom bracket to fit an XP90?
Thanks in advance.
show us the piccy then. i had a 939dual and that just had normal 939 mountings.
i think it does mate, i would check but i dont fancy taking my PC to bits.
i had to completely remove the bracket on mine to get my swiftech apogee on, im sure i used just 2 holes, one above and one below the chip
The pic Im refering too is here:
http://www.ocworkbench.com/2006/asro...al-vsta/g2.htm
the 2 holes you are on about, are on the left and right of the bracket :) to fit the thermalright bracket, you just unscrew the 2 screws out of the stock one, and it should just come off, the thermalright one will just fit straight on.
ah hold on, i see what you mean now. could do with a view of the back.