Results 1 to 11 of 11

Thread: All-in-one mobo or not?

  1. #1
    Senior Member
    Join Date
    Aug 2003
    Location
    Japan and the UK ^_^
    Posts
    226
    Thanks
    0
    Thanked
    0 times in 0 posts

    All-in-one mobo or not?

    All-in-one mobo or a normal one w/ cheaper gfx card? I don't do much gaming, so its a waste for me to buy a good gfx card, but on the other hand I don't like the idea of a performance loss with the all-in-one mobo... Methinks I need some advice...

    The final gfx/mobo config NEEDS to:

    - be rock solid stable / good quality
    - take an Athlon XP 2400+ or higher
    - have TV out

    I was thinking of paying about 100quid or less in total, but would be tempted to spend more if it was essential. It'll have top quality ram in it too, btw so any mobos that are a bit picky about RAM are fine.

    Any suggestions?

  2. #2
    Resident abit mourner BUFF's Avatar
    Join Date
    Jul 2003
    Location
    Sunny Glasgow
    Posts
    8,067
    Thanks
    7
    Thanked
    181 times in 171 posts
    ABIT NF7-M

    edit: oops, don't think that it has tv out.
    Last edited by BUFF; 04-12-2003 at 07:15 PM.

  3. #3
    Senior Member
    Join Date
    Aug 2003
    Location
    Japan and the UK ^_^
    Posts
    226
    Thanks
    0
    Thanked
    0 times in 0 posts
    Do you know how much of a performance hit there is with the onboard video? Is it about 10% or more?
    ♪~( ̄ε ̄;) (/゜ー゜)ノ ((((((●~*

  4. #4
    Resident abit mourner BUFF's Avatar
    Join Date
    Jul 2003
    Location
    Sunny Glasgow
    Posts
    8,067
    Thanks
    7
    Thanked
    181 times in 171 posts
    Don't know, but nForce2 boards with IGP benefit greatly from running dual channel RAM.

  5. #5
    s3v
    s3v is offline
    Registered+
    Join Date
    Oct 2003
    Posts
    27
    Thanks
    0
    Thanked
    0 times in 0 posts
    Biostar M7NCG

    NF2 400, Dual DDR, GF4MX, bla bla, but no TV out.
    Biostar M7NCD Pro ¦ AthlonXP 2400 @ 2.150Ghz ¦ Areocool Deep impact HSF ¦ 1Gig Dual DDR PC2700 ¦ PNY GF4 Ti4200 ¦ 120 + 80 Gig HDD ¦ Pioneer 16x Slot DVD ¦ NEC DVD+R 4x R/W ¦ Lian Li PC6 case ¦ 17" AG-neovo F17 TFT ¦ Herc GXTP ¦ 1Mb ADSL


  6. #6
    Senior Member
    Join Date
    Jul 2003
    Location
    South Wales OR Southampton Uni
    Posts
    2,107
    Thanks
    4
    Thanked
    3 times in 3 posts
    MSI K7N2G Delta-ILSR, I believe that has Tv-out. As the K7N2 Delta-ILSR I bought came with the S-Video and composite bracket, which I assume (and I think I may have seen on the MSI site), was sipposed to onyl ship with the G version.
    I would just recommend that you buy Ram which is listed on the Nforce2 approved list, as you should with any Nforce 2 board .
    As I bought sticks of corsair value select to start with, and it would only boot about 30% of power ons. Works fine with my Samsung Original, Nforce2 approved, Ram , see sig
    Desktop: AMD Athlon XP 2500+ Barton, 1024Mb PC-3200 TwinMOS w/Winbond, MSI K7N2 Delta-ILSR, Radeon 9800SE AIW, 40 GB 7,200 Rpm Hitachi Deskstar, 120GB 7,200 Rpm 8mb Cache Maxtor Diamond 9, 160GB 7200 Rpm 8mb Cache Seagate 7200.7 SATA, Plextor 708A 8x DVD-RW, 550W PFC Q-tec PSU, Casetek 1019SM Silver Case, Camdridge Soundworks DTT2200 Speakers

    Laptop: Clevo D470W - 17" Widescreen TFT, Intel Pentium4 3.06Ghz 533FSB, 1024Mb PC-2700 Hynix, Radeon Mobility 9000 64Mb, Fujitsu 80Gb 4,200rpm, 250Gb 7,2000rpm 8mb Cache Maxtor OneTouch, Toshiba SD-R6372 DVD-RW +/- x4, Built-in Four speakers, webcam and microphone

  7. #7
    Bonnet mounted gunsight megah0's Avatar
    Join Date
    Jul 2003
    Location
    Birmingham
    Posts
    3,381
    Thanks
    79
    Thanked
    73 times in 49 posts
    buy a super cheap biostar nf2 mobo from dabs and spend the saved dosh on a low end graphics card.
    Recycling consultant

  8. #8
    Resident abit mourner BUFF's Avatar
    Join Date
    Jul 2003
    Location
    Sunny Glasgow
    Posts
    8,067
    Thanks
    7
    Thanked
    181 times in 171 posts
    yep looks like the K7N2G-L & K7N2G-ILSR have TV out.

  9. #9
    Senior Member
    Join Date
    Aug 2003
    Location
    Japan and the UK ^_^
    Posts
    226
    Thanks
    0
    Thanked
    0 times in 0 posts
    Thanks for the advice folks...
    ♪~( ̄ε ̄;) (/゜ー゜)ノ ((((((●~*

  10. #10
    bored out of my tiny mind malfunction's Avatar
    Join Date
    Jul 2003
    Location
    Lurking
    Posts
    3,923
    Thanks
    191
    Thanked
    187 times in 163 posts
    • malfunction's system
      • Motherboard:
      • Gigabyte G1.Sniper (with daft heatsinks and annoying Killer NIC)
      • CPU:
      • Xeon X5670 (6 core LGA 1366) @ 4.4GHz
      • Memory:
      • 48GB DDR3 1600 (6 * 8GB)
      • Storage:
      • 1TB 840 Evo + 1TB 850 Evo
      • Graphics card(s):
      • 290X
      • PSU:
      • Antec True Power New 750W
      • Case:
      • Cooltek W2
      • Operating System:
      • Windows 10
      • Monitor(s):
      • Dell U2715H
    I wouldn't recommend an all in one mobo for a different reason - in my experience the quality of the VGA output is poor compared to a separate card - crap ramdacs I suspect - eye strain isn't worth it!

  11. #11
    s3v
    s3v is offline
    Registered+
    Join Date
    Oct 2003
    Posts
    27
    Thanks
    0
    Thanked
    0 times in 0 posts
    A mobo using nforce2 + IGP should have the same quality ramdacs as a video card?
    Biostar M7NCD Pro ¦ AthlonXP 2400 @ 2.150Ghz ¦ Areocool Deep impact HSF ¦ 1Gig Dual DDR PC2700 ¦ PNY GF4 Ti4200 ¦ 120 + 80 Gig HDD ¦ Pioneer 16x Slot DVD ¦ NEC DVD+R 4x R/W ¦ Lian Li PC6 case ¦ 17" AG-neovo F17 TFT ¦ Herc GXTP ¦ 1Mb ADSL


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •