Results 1 to 8 of 8

Thread: USB to Ethernet adaptor? Is what i want to do possible?

  1. #1
    Almost in control. autopilot's Avatar
    Join Date
    Dec 2004
    Location
    Region 2
    Posts
    4,071
    Thanks
    51
    Thanked
    12 times in 11 posts

    USB to Ethernet adaptor? Is what i want to do possible?

    Does anyone here know anything about USB to Ethernet adaptors? i.e. something that would allow me to add a USB HDD to a network?

    I am planning to by a Topfield 58000 PVR, which has a USB port only for moving files on/off it. When you connect it to a PC, you can view the files/folders in Mass Storage Device mode - but i don't want to keep dragging it upstairs to my PC. I want to add it to my network using my Squeezebox3 as a wireless bridge.

    What i plan is this;

    PC -> Ethernet cable -> Wireless access point -> WiFi -> Squeezebox 3 -> Ethernet cable -> Ethernet to USB adaptor -> Topfield PVR.

    It should work, right?

    Thing is i has never used an Ethernet-USB adaptor, has anyone got/used one or have any link to suitable products?

  2. #2
    radix lecti dave87's Avatar
    Join Date
    Sep 2005
    Location
    England
    Posts
    12,806
    Thanks
    657
    Thanked
    931 times in 634 posts
    • dave87's system
      • Motherboard:
      • Asus
      • CPU:
      • i5 3470k under Corsair H80 WC
      • Memory:
      • 8gb DDR3
      • Storage:
      • 240gb SSD + 120gb SSD
      • Graphics card(s):
      • Asus HD7950
      • PSU:
      • XFX 600w Modular
      • Case:
      • Lian Li PC-A05FNB + Acoustipack
      • Operating System:
      • Windows 10 Pro
      • Monitor(s):
      • 2x Dell S2309W (1920x1080)
      • Internet:
      • BT Infinity Option 2
    I would say no, it wont work.

    This is principally because most USB devices need drivers to tell the computer (or in this case, your PVR) what to do with them. It's very unlikely that the PVR manufacturer will have thought about including these drivers for you.

    However, not knowing what OS (be it proprietary or based on some semblance of linux) you may have some success using it.

    Dave

  3. #3
    eek
    eek is offline
    Member
    Join Date
    Jan 2005
    Posts
    148
    Thanks
    1
    Thanked
    3 times in 3 posts
    Your nearly there.

    My solution is:-

    Topfield --> Slug --> wireless Squeezebox as bridge --> wireless network --> PC

    The slug is a Linksys NSLU2 network adaptor that supports external hard discs and can be connected to the topfield.

    http://www.toppy.org.uk would be a better place to ask this sort of question.

    Either way the bridge part of the squeezebox is slow slow slow. Don't expect to be able to pull programs off the topfield at anything like a sensible rate (my daily radio times update for the telly guide takes almost 5 minutes to run).

    However the topfield is miles better than anything else on the market.
    Last edited by eek; 07-11-2006 at 03:28 PM.

  4. #4
    Almost in control. autopilot's Avatar
    Join Date
    Dec 2004
    Location
    Region 2
    Posts
    4,071
    Thanks
    51
    Thanked
    12 times in 11 posts
    Quote Originally Posted by dave87 View Post
    This is principally because most USB devices need drivers to tell the computer (or in this case, your PVR) what to do with them. It's very unlikely that the PVR manufacturer will have thought about including these drivers for you.

    However, not knowing what OS (be it proprietary or based on some semblance of linux) you may have some success using it.
    As far as i can tell from reading various sites and forums, the Topfield does not require any specific drivers as it connects to a PC in the same way as any normal external USB HDD does - in Mass Storage Device Mode - so it's essentially Plug & Play.

    And it's an XP Home OS machine i use.

  5. #5
    Almost in control. autopilot's Avatar
    Join Date
    Dec 2004
    Location
    Region 2
    Posts
    4,071
    Thanks
    51
    Thanked
    12 times in 11 posts
    What about something like these...

    http://www.digi.com/products/usb/any...mpaign=PPC_USB

    There is also something like this...

    http://www.amazon.com/Belkin-F5D5050.../dp/B000062R4P

    Many customers have said they used it to successfully network their TiVo's.
    Last edited by autopilot; 07-11-2006 at 04:01 PM.

  6. #6
    root Member DanceswithUnix's Avatar
    Join Date
    Jan 2006
    Location
    In the middle of a core dump
    Posts
    12,986
    Thanks
    781
    Thanked
    1,588 times in 1,343 posts
    • DanceswithUnix's system
      • Motherboard:
      • Asus X470-PRO
      • CPU:
      • 5900X
      • Memory:
      • 32GB 3200MHz ECC
      • Storage:
      • 2TB Linux, 2TB Games (Win 10)
      • Graphics card(s):
      • Asus Strix RX Vega 56
      • PSU:
      • 650W Corsair TX
      • Case:
      • Antec 300
      • Operating System:
      • Fedora 39 + Win 10 Pro 64 (yuk)
      • Monitor(s):
      • Benq XL2730Z 1440p + Iiyama 27" 1440p
      • Internet:
      • Zen 900Mb/900Mb (CityFibre FttP)
    You have to remember that USB is not a true bus, it has 2 ends that are not the same. Sounds like the topfield looks like a big pendrive, whereas eg a TiVo looks like a PC.

    Sounds like you need something like this bit f kit.

    Sadly they all seem rather steep in price, I think I would rather build up a small linux PC to do the conversion, possibly using a mini-ITX board but then I am happy doing that sort of thing!

  7. #7
    HEXUS.social member Agent's Avatar
    Join Date
    Jul 2003
    Location
    Internet
    Posts
    19,185
    Thanks
    739
    Thanked
    1,614 times in 1,050 posts
    Quote Originally Posted by autopilot View Post
    As far as i can tell from reading various sites and forums, the Topfield does not require any specific drivers as it connects to a PC in the same way as any normal external USB HDD does - in Mass Storage Device Mode - so it's essentially Plug & Play.

    And it's an XP Home OS machine i use.
    Dave pretty much as it bang on. A USB network adaptor is literally just a network socket with a controller chip on it. Most of the processing is done on the CPU, hence drivers are needed by the OS.
    The chances that the squeeze natively supporting it is small to none.

    edited - read it wrong, but i still dont belive it will work. Even if it just shows as a mass storage device, it will still need to use drivers of some sort. If it runs a Linux based OS, you may be able to play about with it.
    Last edited by Agent; 07-11-2006 at 04:31 PM.
    Quote Originally Posted by Saracen View Post
    And by trying to force me to like small pants, they've alienated me.

  8. #8
    eek
    eek is offline
    Member
    Join Date
    Jan 2005
    Posts
    148
    Thanks
    1
    Thanked
    3 times in 3 posts
    autopilot,

    head over to a site where people know the topfield and see what they say. You could spend weeks looking at all manor of devices and you'll find that the mightly strange usb stack within the topfield will confuse you totally.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. USB Ethernet Adapter
    By Aloos in forum Networking and Broadband
    Replies: 3
    Last Post: 09-01-2006, 01:03 AM
  2. Ethernet or USB?
    By silver_rush1 in forum Networking and Broadband
    Replies: 2
    Last Post: 31-01-2005, 05:28 PM
  3. Are these USB Flash drives good value?
    By little me in forum Retail Therapy and Bargains
    Replies: 3
    Last Post: 23-03-2004, 12:57 PM
  4. Weird Problems - Please Help!!
    By chez in forum PC Hardware and Components
    Replies: 4
    Last Post: 20-09-2003, 06:25 PM
  5. a usb ethernet adaptor...
    By streetster in forum Retail Therapy and Bargains
    Replies: 3
    Last Post: 02-09-2003, 02:53 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •