Results 1 to 6 of 6

Thread: advice on new build please...

  1. #1
    Member
    Join Date
    Aug 2003
    Posts
    86
    Thanks
    0
    Thanked
    0 times in 0 posts

    advice on new build please...

    Well, it's been a while since I've been here...

    It's about time to upgrade my ageing Athlon (built way back in 2001), but I'm a bit out of the loop so I'm looking for some seasoned opinions - how does the following sound? (I haven't done a whole lot of shopping around for prices yet but Scan seems to be pretty low, so all these prices are from there.)

    C2D E6400 - £144.98
    Abit AB9 Pro i965 - £93.40
    2x1GB Corsair TwinX XMS2 DDR2PC2-6400(800) 4-4-4-12 EPP - £176.21
    Palit 7600GT Sonic 256MB PCI-E - £78.71
    160GB Seagate ST3160811AS Barracuda 7200.9 SATA300 8MB - £38.80
    480W Tagan TG480-U01 Ultraquiet PSU - £ 58.74

    total £590.84.

    I already have a case, DVD writer and monitor (which is VGA only, hence I picked the Palit as it was one of the few I could find with a VGA output).

    Memory is what I'm most unsure of: how much difference is 800MHz going to make, as opposed to 533 or 667 MHz? (EDIT: I probably *will* be doing some overclocking ) 2GB of 533 Value Select is £138.05, 667 TwinX is £154.56 and the 800 is £176.21 as above (all at 4-4-4-12). I'm not averse to paying the extra £20-40 but only if it's actually going to make a difference.

    Also the PSU was just a guess. I have no idea what kind of power rating I need - would 350-400 be enough, or do I need something more like the 480 on the list?

    Any comments much appreciated I don't want to go above £600 if I can help it though...
    Last edited by Gubs; 07-01-2007 at 07:36 PM.

  2. #2
    Sink or Swim
    Join Date
    Jul 2006
    Location
    Bedford/Leicester
    Posts
    1,393
    Thanks
    61
    Thanked
    6 times in 6 posts
    unless you want to upgrade to a 8800 at some point , a good 400W will do just about fine. If i were you i'd the best 400W PSU you can.

    hmmm im not sure about the different RAM though, someone else will have to sort that out for you

    Apart from that it looks fine

    though...i would buy a E6300 and overclock

  3. #3
    Senior Member Blackmage's Avatar
    Join Date
    Sep 2005
    Location
    London
    Posts
    1,934
    Thanks
    202
    Thanked
    65 times in 45 posts
    • Blackmage's system
      • Motherboard:
      • MSI P67-GD65
      • CPU:
      • Intel Core I7 2600k
      • Memory:
      • 8 Gb Hynix DDR3 1333
      • Storage:
      • Crucial m4 120Gb, 2TB Samsung F4
      • Graphics card(s):
      • ATI HD5830
      • PSU:
      • 700w Coolermaster Gold Plus
      • Case:
      • Xclio/Aplus Windtunnel
      • Operating System:
      • Windows 7 Professional
      • Monitor(s):
      • Viewsonic VX2239WM 22" LCD Monitor
      • Internet:
      • Virgin Broadband 10mbit

  4. #4
    Flat cap, Whippets, Cave. Clunk's Avatar
    Join Date
    Jan 2006
    Posts
    11,056
    Thanks
    360
    Thanked
    725 times in 459 posts
    Most cards come with a DVI-vga adapter, so you can buy whichever one tickles your fancy. Depending on what you want to do with it, the 7600GT is a great card for the money.

    I would go E6300, Asus P5B deluxe wifi (rock solid, plenty of features), the 2x1gb kit of corsair (if you have no intention of overclocking, you can save money by getting lower speed ram as it will run at 4200 default, but still get 2x1gb), PSU, I would certainly go for Seasonic, Enermax (theres a nice liberty modular one for about £50), Im not a fan of tagan, fsp or hiper myself.

    I would also go for a bigger drive with the money saved on the other stuff.

    And not to overclock a C2D is actually illegal in most EU countries now.
    Quote Originally Posted by Blitzen View Post
    stupid betond belief.
    You owe it to yourself to click here really.

  5. #5
    Senior Member
    Join Date
    May 2006
    Location
    London
    Posts
    1,013
    Thanks
    2
    Thanked
    20 times in 18 posts
    • excalibur2's system
      • Motherboard:
      • Z77-d3h
      • CPU:
      • Intel 2500k @4.4ghz
      • Memory:
      • 2X4gb Corsair Vengeance
      • Storage:
      • WD 2tb
      • Graphics card(s):
      • R290
      • PSU:
      • Coolermaster 750
      • Case:
      • Haf-x tower
      • Monitor(s):
      • Dell u2410
      • Internet:
      • broadband with Plusnet
    Well I could easily fill up that 160 gig Hard drive you've listed, have you considered paying a bit more for at least a 250gig. Music, digital camera pics, videos etc can take up a lot of space

  6. #6
    Member
    Join Date
    Aug 2003
    Posts
    86
    Thanks
    0
    Thanked
    0 times in 0 posts
    Hmm. I hadn't realised the C2Ds overclocked quite so well - I've read enough now to convince me that it would be idiotic not to . I'd want to stick to the stock cooling (at least at first), so would the E6300 still be a better choice than the E6400?

    So given that I *am* going to be overclocking, how much of an overclock is going to make the 667/800 memory worth it over the 533? I don't know a whole lot about it (obviously ) but I'm guessing that 1066 FSB means quadpumped 266, which is doubled for the memory to 533... so... (am I also right in thinking that the multipliers are locked?)... I'd need to hit 333 FSB to make the 667 memory worthwhile? Then x7 for the 6300 makes ~2.3GHz, or x8 for the 6400 makes ~2.6GHz. If my maths is right, are they feasible overclocks on stock cooling? Equally it looks like 800 memory would need 2.8/3.2GHz respectively, which seems quite unlikely... So I'm thinking that 667 might be worth it, but possibly not 800?

    I have plenty of hard disk space elsewhere on my network so I'm not fussed about capacity of the new disk - I just want a SATA one

    And as for the graphics card... NWN2 is next on my list and my old GF2 just won't cut it

    Thanks for all the comments so far

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. New Build Advice
    By Frostygills in forum PC Hardware and Components
    Replies: 10
    Last Post: 09-02-2010, 12:11 AM
  2. Advice needed on a high end custom system build
    By sophosuni in forum Chassis and Mods
    Replies: 18
    Last Post: 12-01-2007, 05:26 AM
  3. C2D Build: About to order my first ever build, advice please
    By jr2408 in forum PC Hardware and Components
    Replies: 6
    Last Post: 16-09-2006, 09:34 PM
  4. First time build - advice please
    By jr2408 in forum PC Hardware and Components
    Replies: 9
    Last Post: 15-09-2006, 11:23 AM
  5. First Build Ever Advice
    By mgt in forum PC Hardware and Components
    Replies: 14
    Last Post: 12-09-2006, 04:10 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •