is this a decent overclock ??

[wazi]

first time i have overclocked and dont know if this is any good? if i have made a mistake??

CPU : Intel Pentium 4 (*1)
CPU Arch : 1 Cores - 2 Threads
CPU PSN : Intel(R) Pentium(R) 4 CPU 2.80GHz
CPU EXT : MMX SSE SSE2
CPU Cache : L1 : 12/8 KB - L2 : 512 KB
Core : Northwood (0.130) / Revision : D1
CPUID : F.2.9 / Extended : F.2
Freq : 3342.84 MHz (238.77 * 14)
----------------------------------
MB Brand : http://www.abit.com.tw/
MB Model : IS7/IS7-G/IS7-E (Intel i865-ICH5)
NB : Intel i865P/PE/G/i848P rev A2
SB : Intel 82801EB (ICH5) rev 02
----------------------------------
RAM Size : 1024 MB
RAM Freq : 191 MHz
RAM Type : DDR-SDRAM Single Channel
RAM Ratio : 5:4
RAM Timings : 2.5-3-3-7
----------------------------------
Slot 1 : 1024MB (PC3200)
Slot 1 Manufacturer : Samsung

[Sumanji]

Not bad at all is it your first overclock? As far as I can remember, P4 chips don't like the memory running on a lower divider (i.e. 5:4 as you have it set now), as it hurts performance. 1:1 or higher is better, but obviously your RAM may not be able to keep up as it is only PC3200.

Two very important things:

1) Have you checked the stability? Use Orthos or something and run 12+ hours to make sure you don't have any corruption issues; an unstable overclock is a worthless overclock!

2) Make sure you monitor your temperatures (NB, Mosfets, Case, as well as CPU). Especially important if you've been playing with voltage controls.

Hope that helps,

Suman

[wazi]

yep my first, i can change to 3:2 on divider, but 1:1 wont work comes up with cpu unworkable,
i havent checked stabilty with orthos, but its been running as normal last few days ,
the temps are stable around 35 and max at 49 ish
im using aero cooler and ceramique antec p160 case