is this a decent overclock ??

first time i have overclocked and dont know if this is any good? if i have made a mistake??
http://valid.x86-secret.com/ccpuz.php?id=166018
CPU : Intel Pentium 4 (*1)
CPU Arch : 1 Cores - 2 Threads
CPU PSN : Intel(R) Pentium(R) 4 CPU 2.80GHz
CPU EXT : MMX SSE SSE2
CPU Cache : L1 : 12/8 KB - L2 : 512 KB
Core : Northwood (0.130) / Revision : D1
CPUID : F.2.9 / Extended : F.2
Freq : 3342.84 MHz (238.77 * 14)
----------------------------------
MB Brand : http://www.abit.com.tw/
MB Model : IS7/IS7-G/IS7-E (Intel i865-ICH5)
NB : Intel i865P/PE/G/i848P rev A2
SB : Intel 82801EB (ICH5) rev 02
----------------------------------
RAM Size : 1024 MB
RAM Freq : 191 MHz
RAM Type : DDR-SDRAM Single Channel
RAM Ratio : 5:4
RAM Timings : 2.5-3-3-7
----------------------------------
Slot 1 : 1024MB (PC3200)
Slot 1 Manufacturer : Samsung

Not bad at all :) is it your first overclock? As far as I can remember, P4 chips don't like the memory running on a lower divider (i.e. 5:4 as you have it set now), as it hurts performance. 1:1 or higher is better, but obviously your RAM may not be able to keep up as it is only PC3200.

Two very important things:

1) Have you checked the stability? Use Orthos or something and run 12+ hours to make sure you don't have any corruption issues; an unstable overclock is a worthless overclock!

2) Make sure you monitor your temperatures (NB, Mosfets, Case, as well as CPU). Especially important if you've been playing with voltage controls.

Hope that helps,

Suman

yep my first, i can change to 3:2 on divider, but 1:1 wont work comes up with cpu unworkable,
i havent checked stabilty with orthos, but its been running as normal last few days ,
the temps are stable around 35 and max at 49 ish
im using aero cooler and ceramique antec p160 case