Results 1 to 11 of 11

Thread: Canon lens developed a fault

  1. #1
    Does he need a reason? Funkstar's Avatar
    Join Date
    Aug 2005
    Location
    Aberdeen
    Posts
    19,874
    Thanks
    630
    Thanked
    965 times in 816 posts
    • Funkstar's system
      • Motherboard:
      • Gigabyte EG45M-DS2H
      • CPU:
      • Intel Core2Quad Q9550 (2.83GHz)
      • Memory:
      • 8GB OCZ PC2-6400C5 800MHz Quad Channel
      • Storage:
      • 650GB Western Digital Caviar Blue
      • Graphics card(s):
      • 512MB ATI Radeon HD4550
      • PSU:
      • Antec 350W 80+ Efficient PSU
      • Case:
      • Antec NSK1480 Slim Mini Desktop Case
      • Operating System:
      • Vista Ultimate 64bit
      • Monitor(s):
      • Dell 2407 + 2408 monitors
      • Internet:
      • Zen 8mb

    Canon lens developed a fault

    This is a complete pain in the back side.

    All of a sudden yesterday I started getting "Err 01" on my 350D while using my Canon 17-85 IS lens.

    From what I've read that means there is a comunication error between it and the body. My 50mm prime and 70-300 IS both work fine so it must be the 17-85 that is the problem.

    What is the best way of raising this with Canon? I went through their support system yesterday, but haven't heard back yet.

    The most annoying this is thats my general purpose lens, only got the other two I can use at the moment (I gave the 18-55 kit lens to my uncle).

  2. #2
    radix lecti dave87's Avatar
    Join Date
    Sep 2005
    Location
    England
    Posts
    12,806
    Thanks
    657
    Thanked
    931 times in 634 posts
    • dave87's system
      • Motherboard:
      • Asus
      • CPU:
      • i5 3470k under Corsair H80 WC
      • Memory:
      • 8gb DDR3
      • Storage:
      • 240gb SSD + 120gb SSD
      • Graphics card(s):
      • Asus HD7950
      • PSU:
      • XFX 600w Modular
      • Case:
      • Lian Li PC-A05FNB + Acoustipack
      • Operating System:
      • Windows 10 Pro
      • Monitor(s):
      • 2x Dell S2309W (1920x1080)
      • Internet:
      • BT Infinity Option 2

    Re: Canon lens developed a fault

    Have you tried cleaning the contacts on the lens itself?

    If it is a communication error it could just be grease/grime stopping full contact?

  3. #3
    Does he need a reason? Funkstar's Avatar
    Join Date
    Aug 2005
    Location
    Aberdeen
    Posts
    19,874
    Thanks
    630
    Thanked
    965 times in 816 posts
    • Funkstar's system
      • Motherboard:
      • Gigabyte EG45M-DS2H
      • CPU:
      • Intel Core2Quad Q9550 (2.83GHz)
      • Memory:
      • 8GB OCZ PC2-6400C5 800MHz Quad Channel
      • Storage:
      • 650GB Western Digital Caviar Blue
      • Graphics card(s):
      • 512MB ATI Radeon HD4550
      • PSU:
      • Antec 350W 80+ Efficient PSU
      • Case:
      • Antec NSK1480 Slim Mini Desktop Case
      • Operating System:
      • Vista Ultimate 64bit
      • Monitor(s):
      • Dell 2407 + 2408 monitors
      • Internet:
      • Zen 8mb

    Re: Canon lens developed a fault

    I haven't cleaned them other than wiping them with a cloth. They are completely shiney and look brand new.

    The lens practically lifes on my 350D

  4. #4
    Photographer Bobster's Avatar
    Join Date
    Apr 2004
    Location
    Sunny Dorset
    Posts
    3,427
    Thanks
    25
    Thanked
    376 times in 304 posts
    • Bobster's system
      • Motherboard:
      • Gigabyte AX370 GAMING K7
      • CPU:
      • Ryzen 5 5600X
      • Memory:
      • G.Skill FlareX 32GB DDR4 3200
      • Storage:
      • 42TB
      • Graphics card(s):
      • MSI 6700XT
      • PSU:
      • Corsair RM850X
      • Case:
      • SilverStone TJ05
      • Operating System:
      • Windows 10 Pro
      • Monitor(s):
      • LG LG 27UD88-W, LG 27 ColourPrime, HP LP2475w
      • Internet:
      • 16Mb

    Re: Canon lens developed a fault

    get a rubber and just gently rub over the contacts on the lens and try again

    have you taken the battery out of the camera and replaced it again?

  5. #5
    Does he need a reason? Funkstar's Avatar
    Join Date
    Aug 2005
    Location
    Aberdeen
    Posts
    19,874
    Thanks
    630
    Thanked
    965 times in 816 posts
    • Funkstar's system
      • Motherboard:
      • Gigabyte EG45M-DS2H
      • CPU:
      • Intel Core2Quad Q9550 (2.83GHz)
      • Memory:
      • 8GB OCZ PC2-6400C5 800MHz Quad Channel
      • Storage:
      • 650GB Western Digital Caviar Blue
      • Graphics card(s):
      • 512MB ATI Radeon HD4550
      • PSU:
      • Antec 350W 80+ Efficient PSU
      • Case:
      • Antec NSK1480 Slim Mini Desktop Case
      • Operating System:
      • Vista Ultimate 64bit
      • Monitor(s):
      • Dell 2407 + 2408 monitors
      • Internet:
      • Zen 8mb

    Re: Canon lens developed a fault

    I'll give them both a go tonight.

    Thanks Bob.

  6. #6
    Does he need a reason? Funkstar's Avatar
    Join Date
    Aug 2005
    Location
    Aberdeen
    Posts
    19,874
    Thanks
    630
    Thanked
    965 times in 816 posts
    • Funkstar's system
      • Motherboard:
      • Gigabyte EG45M-DS2H
      • CPU:
      • Intel Core2Quad Q9550 (2.83GHz)
      • Memory:
      • 8GB OCZ PC2-6400C5 800MHz Quad Channel
      • Storage:
      • 650GB Western Digital Caviar Blue
      • Graphics card(s):
      • 512MB ATI Radeon HD4550
      • PSU:
      • Antec 350W 80+ Efficient PSU
      • Case:
      • Antec NSK1480 Slim Mini Desktop Case
      • Operating System:
      • Vista Ultimate 64bit
      • Monitor(s):
      • Dell 2407 + 2408 monitors
      • Internet:
      • Zen 8mb

    Re: Canon lens developed a fault

    OK, tried both and still the same problem.

    Sometimes though, instead of getting Err 01, i just get '00' as an aperature.

    What is the best way of contacting Canon to get this sorted? The message through their support system is unanswered as yet. Should I just phone them?

  7. #7
    Amateur photographer Hans Voralberg's Avatar
    Join Date
    Dec 2004
    Location
    Birmingham
    Posts
    1,889
    Thanks
    1
    Thanked
    11 times in 11 posts

    Re: Canon lens developed a fault

    Phone them up, or take it to a Canon service center. The 17-85 does have a reputation for failing randomly, I have seen 2, one similar to you, another got stuck aperture. I sent them both to Canon for service.
    Primary kit:
    Fuji S5 Pro - Nikkor AF 50/1.8 - Nikkor AF 85/1.8
    Epson RD-1

    Film Kit:
    Leica M3 - Summicron 50/2 DR - Zeiss ZM 25/2.8 - M-Rokkor 40/2

    Olympus OM2n - Zuiko 50/2 Macro - Zuiko 50/1.4 - Zuiko 35/2.8

  8. #8
    Does he need a reason? Funkstar's Avatar
    Join Date
    Aug 2005
    Location
    Aberdeen
    Posts
    19,874
    Thanks
    630
    Thanked
    965 times in 816 posts
    • Funkstar's system
      • Motherboard:
      • Gigabyte EG45M-DS2H
      • CPU:
      • Intel Core2Quad Q9550 (2.83GHz)
      • Memory:
      • 8GB OCZ PC2-6400C5 800MHz Quad Channel
      • Storage:
      • 650GB Western Digital Caviar Blue
      • Graphics card(s):
      • 512MB ATI Radeon HD4550
      • PSU:
      • Antec 350W 80+ Efficient PSU
      • Case:
      • Antec NSK1480 Slim Mini Desktop Case
      • Operating System:
      • Vista Ultimate 64bit
      • Monitor(s):
      • Dell 2407 + 2408 monitors
      • Internet:
      • Zen 8mb

    Re: Canon lens developed a fault

    Any idea about duration and cost of repair.

    I never got a chance to phone them on friday.

    Depending on how long it takes I'd be tempted to get another lens so I can still use it in the mean time. Perhaps just a general purpose Sigma 18-200 or something.

  9. #9
    Amateur photographer Hans Voralberg's Avatar
    Join Date
    Dec 2004
    Location
    Birmingham
    Posts
    1,889
    Thanks
    1
    Thanked
    11 times in 11 posts

    Re: Canon lens developed a fault

    It was ages ago so I cant remember the exact cost, something around the £90 mark. Took 5-7 days.
    Primary kit:
    Fuji S5 Pro - Nikkor AF 50/1.8 - Nikkor AF 85/1.8
    Epson RD-1

    Film Kit:
    Leica M3 - Summicron 50/2 DR - Zeiss ZM 25/2.8 - M-Rokkor 40/2

    Olympus OM2n - Zuiko 50/2 Macro - Zuiko 50/1.4 - Zuiko 35/2.8

  10. #10
    Does he need a reason? Funkstar's Avatar
    Join Date
    Aug 2005
    Location
    Aberdeen
    Posts
    19,874
    Thanks
    630
    Thanked
    965 times in 816 posts
    • Funkstar's system
      • Motherboard:
      • Gigabyte EG45M-DS2H
      • CPU:
      • Intel Core2Quad Q9550 (2.83GHz)
      • Memory:
      • 8GB OCZ PC2-6400C5 800MHz Quad Channel
      • Storage:
      • 650GB Western Digital Caviar Blue
      • Graphics card(s):
      • 512MB ATI Radeon HD4550
      • PSU:
      • Antec 350W 80+ Efficient PSU
      • Case:
      • Antec NSK1480 Slim Mini Desktop Case
      • Operating System:
      • Vista Ultimate 64bit
      • Monitor(s):
      • Dell 2407 + 2408 monitors
      • Internet:
      • Zen 8mb

    Re: Canon lens developed a fault

    Thats not too bad. I'll try and remember to give them a call today

    Thanks Hans

  11. #11
    HEXUS.social member Agent's Avatar
    Join Date
    Jul 2003
    Location
    Internet
    Posts
    19,185
    Thanks
    739
    Thanked
    1,614 times in 1,050 posts

    Re: Canon lens developed a fault

    I've RMAed to Cannon before, but nothing Camera wise.

    Fast and painless, although mine was within the first year.
    Quote Originally Posted by Saracen View Post
    And by trying to force me to like small pants, they've alienated me.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Canon EOS 400D (18-55mm Lens Kit)
    By Rev_Hill in forum Retail Therapy and Bargains
    Replies: 0
    Last Post: 06-12-2007, 04:24 PM
  2. Canon 350D and Lens choices
    By TomWilko in forum Photography
    Replies: 30
    Last Post: 20-10-2005, 12:23 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •