Hi my PC suddenly turned off and will not start. Inside the case the mobos green lite is on suggesting there is power from the psu but i have just done a quick test by putting a voltage tester on the molex connector (negative on the black and positive on on yellow/red) When pc is turned on my non digital voltage connector will lite fully up to the 400v but will then just dissapear with only the + green lite on the right liten up, just as if you were testing the voltage tester. Does this mean psu is broken. Ps forgive my brief description on testing but i am in no way a electriacian as youve probably guessed. LASTLY IF I DO THE PAPERCLIP TEST WHERE DO I PUT IT PS?Thanks in advance
ps ive checked the power switch wiring on front case but its not faulty. Also the voltage tester is a Steinel master check 3.2. PSU is a Enermax
http://t1.gstatic.com/images?q=tbn:A...NpxAiXssXvDEbA
ps jUST TRIED THE PAPERCLIP ON THE atx GREEN AND BLACK WIRES BUT FAN DID NOT SPIN SO I AM GUESSING PSU IS DEAD...iS THIS CORRECT?