Printable View
So im sick and tired of the back of my Fractal Mini being the biggest mess in the world, so im going to rewire most of my CX500.
This wire looks about right?
http://www.rapidonline.com/Cables-Co...ent-wire-75386
Anyone know of any cheaper? i dont really need 100m of the stuff :/
Every time i want something from there its out of stock
"Out Of Stock - Contact Us For ETA"
Might just get the 100m spool, it should last me a while
Sure you could find wires and stuff on eBay for less or maybe at Maplins?
Looks like chilled has the cable in stock.
If you want something that's not on the shelf, then just drop a note to Tom & he will sort it out.
As for other suppliers, recently purchased some from Mapline & it was very expensive for the quantity I had.
Rapid is not a bad company but 100 mts of cable is a lot.
I purchased a roll to make up a complete set of cables & I still have loads left.
I think I will have enough for years to come :rolleyes:
Its out of stock for the black
http://www.chilledpc.co.uk/shop/prod...oducts_id=1039
Its only £17 after shipping and tax, i guess i will never run out of cable :D
I was just going to say the key thing you want it 18 AWG at least, American Wire Gauge is the standard thickness measurement used for most wires, it's a smaller = thicker measurement, you can get away thinner (20-22 AWG) on some of the wires and often you'll find 16AWG used on some of the 12v cables on higher end psu's, less resistance so less voltage loss over distance, although on most psu's the distances are not really long enough for major voltage loss issues.
What can be an issue is in el-cheapo psu's where they'll use thinner wire gauges the wires get hot and inside the psu where all the wires come together thinner wires can generate enough heat to melt the insulation.
I agree with what Pob says. :)
I remember killing a very cheep PSU a long time ago by adding extra length to the cables.
Just went up in smoke :Oops: