Originally Posted by
Ben @ Scan
Your overclock settings are as follows:
PU Overclock Tuner: Manual
CPU Ratio Setting: 19
Intel (R) Speedstep (TM) Tech: Disabled
BCLK Freq: 200
PCIE Freq: 100
DRAM Freq: DDR3-1600 MHz
UCLK Freq: Auto
QPI Link Data Rate: Auto
DRAM Timing Control: 9-9-9-24 2N
CPU Voltage: 1.35
CPU PLL Voltage: 1.82
QPI/DRAM Core Voltage: 1.33125
IOH Voltage: Auto
IOH PCIE Voltage: Auto
ICH Voltage: Auto
ICH PCIE Voltage: Auto
DRAM Bus Voltage: 1.66
Loadline Calibration: Enable
CPU Differential Amplitude: Auto
CPU Clock Screw: Normal
CPU Spread Spectrum: Disabled
IOH Clock Screw: Normal
PCIE Spread Spectrum: Disabled
CPU Ratio Setting: 19
C1E Support: Disabled
Hardware Prefetcher: Enabled
Adjacent Cache Line Prefetch: Enabled
Intel Virtualization Tech: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled
Intel HT Technologhy: Enabled
Active Processor Cores: All
A20M: Disabled
Intel (R) Speedstep (TM) Tech: Disabled
Intel C-STATE Tech: Disabled