i need a 240v pump relay to switch my pump on when the pc comes on
there is ones that fit in pci slots but i dont have a free one so i need a different option
any ideas ?
cheers
mrbeef
i need a 240v pump relay to switch my pump on when the pc comes on
there is ones that fit in pci slots but i dont have a free one so i need a different option
any ideas ?
cheers
mrbeef
dfi sli-dr | AMD64 3700+ san | 2 Gb kingston PC3200 | SLI XFX 6800GT | emu 1820m + ADAT 32 channel audio card | 600w modualar PSU | 300Gb maxtor maxline | 3 X 300 samsung spin point sata2 hdds | 70Gb raptor | akasa case | Zalman Reserator 1 Plus with two cpu blocks |
ifyouknowme also know as HEXUS|Mrbeef
Assuming you are comfortable and safe doing mains wiring...
Get a normal relay switched with 12V across the coil and sufficient contact current rating to run the pump.
Wire the coil to a hard disk molex connector across the ground and +12V wires so that the relay will be turned on when the PC is started.
Wire a 240V supply through the relay contacts and run it to the pump.
Would only take 10 minutes to solder one up
just ordering a relay and some connectorsOriginally Posted by toolsong
dfi sli-dr | AMD64 3700+ san | 2 Gb kingston PC3200 | SLI XFX 6800GT | emu 1820m + ADAT 32 channel audio card | 600w modualar PSU | 300Gb maxtor maxline | 3 X 300 samsung spin point sata2 hdds | 70Gb raptor | akasa case | Zalman Reserator 1 Plus with two cpu blocks |
ifyouknowme also know as HEXUS|Mrbeef
There are currently 1 users browsing this thread. (0 members and 1 guests)