Read more.Slotting in between the Radeon HD 5870 and Radeon HD 5870 X2?
Read more.Slotting in between the Radeon HD 5870 and Radeon HD 5870 X2?
They'll probably hold onto the 5890 until they see what the fastest single GPU NVIDIA can produce.
TDP of 5870 is 188W. 5850 is 170W. Considering 5850 has 10% of it's SIMD and TMUs disabled, and has a 10% less TDP, which may or may not actually be accurate in real power consumption, I'm just assuming something to do with 40nm leakage is requiring voltage to be similar. Not unlike 4770 which was capable of high clocks, but had a very high initial TDP for what it was.
Supporting this, it's been reported 1ghz on the stock cooler is very possible...like 4890...so it would seem 1ghz can be done at less than 225W. I'm assuming of course a 5890 would be clocked so it achieve over 3TF (938mhz), at least the percentage higher 4890 was (13.3%...964mhz), and 1ghz just looks pretty on the box.
That being said, consider these things:
1. The PCB power connectors on 5870 have the solder points and room for an 8-pin connector in place of one 6-pin. The 4890 has this as well, and was used in OC models that were clocked up to 1ghz.
2. 5870 uses 4-phase power (5850 3-phase) with room for one more. 4870 used 3, 4890 used 5.
Does indeed look like history will repeat, in a newly tiered fashion. If I had to guess, it will launch at 5870's price when 5870/5850 settle (~$200/300). There's also the possibility it will launch at a better price to beat it's closest GTX300 rival in price/performance upon their launch. That would be something to see...ATi spoiling an nvidia launch!
Whatever be the case, I expect whatever the stock clock is on 5890, it will also be on the 32nm XT refresh...or darn close. Seems ATi has found themselves a tick-tock strategy of sorts!
1. Release moderately-clocked and harvested parts on initial process yield (4870/4850...5870/5850)
2. Release parts towards highest feasible clock on matured process yield (5890...or the refined 55nm rv790/4890). OC part with 8-pin connector an idea of 90 part on next-gen.
3. Start again on next process using **70/**90 clocks as baseline clocks.
Damn, guess I'll have to wait until 32nm to see if we have 800/1000/1200mhz parts and that actually happens. Bet it does. That's a pretty smart way to both get to market quickly and complete a product stack, IMHO.
Last edited by alwayssts; 21-09-2009 at 10:55 PM.
borandi (12-11-2009)
You don't say?
Attempting to extract more money by creating artificial performance boundaries? Sounds like a tech company, alright.
Corsair Air 540, Asus Prime X570-Pro, Win 10 Pro, AMD R9 3900X, Corsair HX 750, EVGA 1080 Ti, 2x Corsair 2TB MP600, 2x 2TB WD20EZRX, 4x8GB Corsair Dominator, custom watercooled (single loop, 2 rads)
Corsair 550D, Asus X470-Prime Pro, Win 10 Pro, AMD R7 2700, Corsair RM750i, Asus GTX780 Poseidon, 2x Sammy 500GB 970 EVO, 2x 2TB Seagate Barracuda, 2x8GB Corsair Vengeance, custom watercooled (single loop, 2 rads)
Synology DS918+ w/ 2xWDC Green 3TB + 2x Seagate Barracuda 6TB, N2200 w/ 2xSammy 1.5TB
backup:
Corsair 500R, Gigabyte GA-Z97MX Gaming 5, Win 10 Pro, i5 4690, Corsair HX750i, Sapphire Fury X, 256GB Sammy SM951 M.2 (System), WD SE16 640GB, 2x8GB Corsair Vengeance, Corsair H100i
I agree wait until nvidia brings out there best single gpu then if its better means they can work on it then release then basically take the cake again
There are currently 1 users browsing this thread. (0 members and 1 guests)