Hello,
With the N4100+ i just received , the install cd is blank.
Is there a iso image of this install cd available somewhere ?
Or are the software and the docs the same as the N4100 ?
Thanks for your help.
Dan.
Hello,
With the N4100+ i just received , the install cd is blank.
Is there a iso image of this install cd available somewhere ?
Or are the software and the docs the same as the N4100 ?
Thanks for your help.
Dan.
Hi Dan!
That's not good, ok. But actually you do not need the CD at all.
Hook up your N4100+ via the WAN-port in your network. Make your config-computer be part of the 192.168.1.x network (like IP=192.168.1.23, netmask=255.255.255.0). Then boot up the Thecus and start your browser. By typing in "192.168.1.100" as the address you will get to the login-page of your new thecus. Default parameters are: username=admin, password=admin. From there you can do what you want...
For a manual look at http://www.thecus.com/dl.php
Hope this helps
Hardware mods:
# they void your warranty
# they may seem to work, but kill your machine later on
# they are mostly unneeded, because the engineers who built a machine knew what they were doing...
Thanks Stefan for your quick reply and help.
I'm wondering what's the difference between the N4100 and the N4100+ if the docs are the same ?
well, the N4100+ got a few more features, but the basics are the same on both machines. And let's be honest:
- the disk drive installation is child's play
- the hooking up also
- the firmware is mostly self-explanatory
- on spots where it is not, you just need to know how to google
Hardware mods:
# they void your warranty
# they may seem to work, but kill your machine later on
# they are mostly unneeded, because the engineers who built a machine knew what they were doing...
Dear Sir,
Please mail to support@thecus.com and we will provide the downlaod link for you.
Yvon.
There are currently 1 users browsing this thread. (0 members and 1 guests)