Hey I hope someone has some ideas for me, because this is driving me up the wall!
I performed a firmware update from 1.00.08 to 2.00.01 and everything whent smoothly without any problems, but shortly after this I noticed I could not get SMB/CIFS to start.
Network/Services has SMB/CIFS Sharing and File Access Cache Enabled, along with UPnP.
I can disable and enable these features, and with a reboot there is no change.
(I can get AFP, NFS, FTP and UPnP to start)
The only errors I have in the System Log are:
"The system N5200's [ RAID ] disk usage has reached 90%."
The RAID is sucessfully assembled in the Info logs and I have performed a file system check without errors.
Thecus N5200 Details:
- Loaded with 5x Seagate 750G (ST3750640AS)
- Firmware 2.00.01
- Running Factory Default settings (asside from Admin password & IP addresses)
- No Modules installed