N5200 E-Mail notification for UPS....?

[Thorstense]

Hello!

I’m the owner of Thecus N5200 with Firmware 2.00.01 and 4 HDD’s in Raid 5.

I have installed a APC Smart-UPS sc 420 and it works fine.
The N5200 show the Powerstatus, Batterystatus and shut down clean.

But the E-mail notification don't work.
Is this problem known???

Best regards, Thorsten

[Thecus - Yvon]

Daer Sir,

How about the email notificaiton test button, does the email notifcation is working? following event would list on the warning log and system would sent the email for notification:

The AC Power has recovered for system --->host_name<---.
The system --->host_name<--- is on battery power.
The system --->host_name<--- found UPS has low battery.
The system --->host_name<--- found UPS has being shutdown by the master.
The system --->host_name<--- found communications established with the UPS.
The system --->host_name<--- found communications lost to the UPS.
The system --->host_name<--- will be shutdown by UPS trigger.
The system --->host_name<--- found UPS battery is bad and needs to be replaced.
The system --->host_name<--- found UPS is unavailable.
The system --->host_name<--- found UPS has low battery less then user define ,and system will auto shutdown.


Yvon.

[Thorstense]

@ Yvon,

thanks for your answer!

I have try click the "test" button for e-mail notification test and it works fine.
I've got follow e-mail:

Hello thorsten.XXXXXXX@XX.de

This notification message is generated automatically from Thecus-N5200 (192.168.2.100).
The system experienced the following event(s).


This is a test email sent by "Thecus-N5200".
If you received this email, that means the configuration was set up correctly.


Please be aware of the event(s) above. Also if necessary, please react to the event(s).

==============================================
The automated message is generated at 2007-12-11 19:57:36 by Thecus-N5200 (raid5) (192.168.2.100).

If I unplug the AC power cord I got no e-mail notification and the protocol has no information too

Best regards, Thorsten :-)

[Thecus - Yvon]

Dear Sir,

We will arrange a tets to veify this with the new release firmware V2.0.04 next week.

Yvon.

[Thorstense]

@ Yvon,

do you have informations already if the UPS e-mail notification works with the FW 2.00.04?

Best regards, Thorsten :-)

[Anselm]

Yes, e-mail notification works with the new firmware.
This is the first message which comes when the UPS kicks in:

--- snip ---

Hello [here comes the e-mail address(es) this message was sent to]

This notification message is generated automatically from N5200 (192.168.1.2).
The system experienced the following event(s).


The system N5200 is on battery power.
UPS Model : Smart-UPS SC420 Battery Status : 100.0 % Power : Battery


Please be aware of the event(s) above. Also if necessary, please react to the
event(s).

==============================================
The automated message is generated at 2007-12-21 15:00:45 by N5200 (raid1) (192.168.1.2).

--- end snip ---

[Thorstense]

@Anselm,

thanks for your information.
Now I have test this feature too. It works successful with the firmware 2.00.04.

Hello thorsten.XXXXXXX@XXXX.de

This notification message is generated automatically from Thecus-N5200 (192.168.2.100).
The system experienced the following event(s).


The system Thecus-N5200 is on battery power.
UPS Model : Smart-UPS SC420 Battery Status : 100.0 &#37; Power : Battery


Please be aware of the event(s) above. Also if necessary, please react to the event(s).

==============================================
The automated message is generated at 2007-12-22 23:31:18 by Thecus-N5200 (raid5) (192.168.2.100).



Best regards, Thorsten