Printable View
Why isn't all of my space available? I have already done the modification seen below:
That was posted in the Thecus User Group on Proboards. Here is a screenshot of what I am talking about (copy and past, change the "hxxp" to "http"... silly no links until 5 posts rule):Code:tune2fs -m 0 /dev/vg0/lv0
hxxp://img201.imagevenue.com/img.php?image=90406_raid_122_453lo.jpg
I am only getting 897GB when it says my total is 927GB. Is some reserved for something? Thanks in advance.
did you allocate space for the USB storage?
No, I didn't. Where would I do that? Can I take the space back if I did it accidentally?
Edit: I found where I would do that and no space is allocated, nor can I allocate any. So it doesn't look like that is the issue.
The difference (about 3%) are file system overhead (inode tables, ...). Since the total RAID size is taken from /proc/partitions it shows the total partition size, not the file system data size. The data size instead is taken from the DU command and shows the filesystem free data space. So, if you have allocated all space to the RAID and your data size is about 3% less than your RAID total size everything is fine.
That all ... ;o)
/Falk
Here's a post from The Thecus User Group:
What is causing this?Quote:
Today at 2:44am, vitocorleone wrote:
[ Code]
root@127.0.0.1# /sbin/vgdisplay -v
Finding all volume groups
Finding volume group "vg0"
--- Volume group ---
VG Name vg0
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 3
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 2
Open LV 2
Max PV 0
Cur PV 1
Act PV 1
VG Size 2.04 TB
PE Size 4.00 MB
Total PE 535115
Alloc PE / Size 508340 / 1.94 TB
Free PE / Size 26775 / 104.59 GB
VG UUID jaCXaZ-xqDx-4eQJ-a3b2-f6wl-61Ai-3zGKYG[code]
I think I've found the culprit: the "Free PE" is 104.59 GB.
This is space which is not assigned yet. I've checked my setup and for me Free PE is about 100 MB only.
Don't know, why the free PE is so high for you, I'm a little bit short in time now, maybe later....
Does someone else know why the Free PE is so high here?
You might want to send an e-mail to Thecus about this and get a ticket... ;)
Andreas
Please see
Thecus User Group - Usable Space? (RAID 0)
the value shown in the WebUI does not match the value configured (raid.db = 95%) so I expect the WebUI page (FW 2.00.01) to be brocken ... will check this
/Falk