Results 1 to 10 of 10

Thread: Problem with installing moduls on N5200

  1. #1
    Registered User
    Join Date
    Apr 2008
    Location
    Germany
    Posts
    4
    Thanks
    0
    Thanked
    0 times in 0 posts
    • mulderk's system
      • CPU:
      • Intel Core 2 Duo
      • Memory:
      • 2 GB
      • Monitor(s):
      • 22 " Wide Screen
      • Internet:
      • DSL 16000

    Problem with installing moduls on N5200

    I have problems to install any of the modules to the N5200.

    I open the web-configuration and go to SYSTEM MODULE MGNT.
    I klick on "Durchsuchen" (search) an point to the *mod-file i like to install (I have tried some).
    I klik OK an the file-path apeares in the browser-field ("R:....INFO.mod").
    I klick on INSTALL.
    I klick in OK at the question "Do you want to install module?"
    And then I get this message every time:


    Your URL is not define, please check it!


    I have installed firmware version V2.00.04.5.
    My N5200 is set up to run as a RAID5 with SMB with 3x750 GB Harddisks.

    WAN is set fixed to:
    192.168.2.152 (ip)
    255.255.255.0 (netmask)
    192.168.2.2 (gateway)
    192.168.2.2 (dns server - tried to let this blank as well)
    used with Gigabit network.

    LAN settings:
    192.168.1.254 (ip)
    255.255.255.0 (netmask)
    No cable here.

    I hope there is somebody who can help...

  2. #2
    Senior Member
    Join Date
    Jun 2007
    Location
    Austra
    Posts
    453
    Thanks
    0
    Thanked
    14 times in 14 posts

    Re: Problem with installing moduls on N5200

    As far as I remember the "..URL is not define.." was a problem in FW 2.00.03 and then solved in FW 2.00.04.
    FW 2.00.04.5 I don't even now, cause the last released one is 2.00.04. Are You sure about Your FW version ?
    br
    Peter

  3. #3
    Registered User
    Join Date
    Apr 2008
    Location
    Germany
    Posts
    4
    Thanks
    0
    Thanked
    0 times in 0 posts
    • mulderk's system
      • CPU:
      • Intel Core 2 Duo
      • Memory:
      • 2 GB
      • Monitor(s):
      • 22 " Wide Screen
      • Internet:
      • DSL 16000

    Re: Problem with installing moduls on N5200

    Yes - definitifly:

    Status / About shows this:

    Manufacturer Thecus
    Product No. N5200
    Firmware Version 2.00.04.5
    Up Time 19 hours 57 minutes

    Should I load an other firmware-release?

  4. #4
    Does he need a reason? Funkstar's Avatar
    Join Date
    Aug 2005
    Location
    Aberdeen
    Posts
    19,874
    Thanks
    630
    Thanked
    965 times in 816 posts
    • Funkstar's system
      • Motherboard:
      • Gigabyte EG45M-DS2H
      • CPU:
      • Intel Core2Quad Q9550 (2.83GHz)
      • Memory:
      • 8GB OCZ PC2-6400C5 800MHz Quad Channel
      • Storage:
      • 650GB Western Digital Caviar Blue
      • Graphics card(s):
      • 512MB ATI Radeon HD4550
      • PSU:
      • Antec 350W 80+ Efficient PSU
      • Case:
      • Antec NSK1480 Slim Mini Desktop Case
      • Operating System:
      • Vista Ultimate 64bit
      • Monitor(s):
      • Dell 2407 + 2408 monitors
      • Internet:
      • Zen 8mb

    Re: Problem with installing moduls on N5200

    Odd, didn't know there was a 2.00.04.5. 2.00.07 has been mensioned on the user forums a couple of times so that can't be long in coming.

    Sorry I don't really have any suggestions for your problem though.

  5. #5
    Senior Member
    Join Date
    Jun 2007
    Location
    Austra
    Posts
    453
    Thanks
    0
    Thanked
    14 times in 14 posts

    Re: Problem with installing moduls on N5200

    This FW version (2.00.04.5) must be one of the beta versions of FW 2.00.04 - interesting would be from where You have it. As far as I know there is no easy possibility to downgrade to 2.00.04.
    @MulderK: Could You activate in Your profile the possibility to send You PM's ?
    br
    Peter

  6. #6
    Does he need a reason? Funkstar's Avatar
    Join Date
    Aug 2005
    Location
    Aberdeen
    Posts
    19,874
    Thanks
    630
    Thanked
    965 times in 816 posts
    • Funkstar's system
      • Motherboard:
      • Gigabyte EG45M-DS2H
      • CPU:
      • Intel Core2Quad Q9550 (2.83GHz)
      • Memory:
      • 8GB OCZ PC2-6400C5 800MHz Quad Channel
      • Storage:
      • 650GB Western Digital Caviar Blue
      • Graphics card(s):
      • 512MB ATI Radeon HD4550
      • PSU:
      • Antec 350W 80+ Efficient PSU
      • Case:
      • Antec NSK1480 Slim Mini Desktop Case
      • Operating System:
      • Vista Ultimate 64bit
      • Monitor(s):
      • Dell 2407 + 2408 monitors
      • Internet:
      • Zen 8mb

    Re: Problem with installing moduls on N5200

    He needs a few more posts to be able to use PMs.

    I think it is 5 in total, but I can't be sure.

  7. #7
    Senior Member
    Join Date
    Jun 2007
    Location
    Austra
    Posts
    453
    Thanks
    0
    Thanked
    14 times in 14 posts

    Re: Problem with installing moduls on N5200

    Ahh, again the 5 post border as it is for posting links

  8. #8
    Does he need a reason? Funkstar's Avatar
    Join Date
    Aug 2005
    Location
    Aberdeen
    Posts
    19,874
    Thanks
    630
    Thanked
    965 times in 816 posts
    • Funkstar's system
      • Motherboard:
      • Gigabyte EG45M-DS2H
      • CPU:
      • Intel Core2Quad Q9550 (2.83GHz)
      • Memory:
      • 8GB OCZ PC2-6400C5 800MHz Quad Channel
      • Storage:
      • 650GB Western Digital Caviar Blue
      • Graphics card(s):
      • 512MB ATI Radeon HD4550
      • PSU:
      • Antec 350W 80+ Efficient PSU
      • Case:
      • Antec NSK1480 Slim Mini Desktop Case
      • Operating System:
      • Vista Ultimate 64bit
      • Monitor(s):
      • Dell 2407 + 2408 monitors
      • Internet:
      • Zen 8mb

    Re: Problem with installing moduls on N5200


  9. #9
    Registered User
    Join Date
    Apr 2008
    Location
    Germany
    Posts
    4
    Thanks
    0
    Thanked
    0 times in 0 posts
    • mulderk's system
      • CPU:
      • Intel Core 2 Duo
      • Memory:
      • 2 GB
      • Monitor(s):
      • 22 " Wide Screen
      • Internet:
      • DSL 16000

    Re: Problem with installing moduls on N5200

    It could have th following reason:
    There was an older firmware on the divice and I updated it to 2.00.04. I found the firmare-file on my PC.

    Then I found in some forum that there is a new version of the media server in a standalone firmware file.
    After this Installation the firmware-Version is shown as 2.00.04.5
    But no possibility th install modules anyway.

    I contacted Thecus via support-mail. Lets see...
    Tomorrow I try to downgrade, perhaps this will function.

  10. #10
    Registered User
    Join Date
    Apr 2008
    Location
    Germany
    Posts
    4
    Thanks
    0
    Thanked
    0 times in 0 posts
    • mulderk's system
      • CPU:
      • Intel Core 2 Duo
      • Memory:
      • 2 GB
      • Monitor(s):
      • 22 " Wide Screen
      • Internet:
      • DSL 16000

    Re: Problem with installing moduls on N5200

    I got an email from the Thecus Support.
    There is a new firmware 2.00.05.1 upgrade.
    I tryed it and everything works fine now.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Problem installing Thermalright ulltima 90!
    By rob4001 in forum PC Hardware and Components
    Replies: 9
    Last Post: 09-03-2008, 06:09 PM
  2. AB9 installing windows problem
    By greektony in forum abit.care@HEXUS
    Replies: 30
    Last Post: 02-01-2007, 01:32 PM
  3. Replies: 1
    Last Post: 31-12-2006, 08:46 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •