Hi,
1st post here, sorry its to moan
I have bought the Abit AW9D-max board and I'm having major issues with it.
I transfered my Old 7800GTX into it and the system worked ok for a cpl of hours then shut down, and would reboot no matter what I tried, unitl I took the card out. Tested the card in another system and its now totally dead.
Also I had 4Gb ram working fine in this system, until a BSOD and upon reboot Os wouldnt load, after much investigation (Memtest mainly) I have found out that 2 of my 1Gb XMS2 sticks are giving errors. One boots but errors in memtest and causes BSOD, the other just sticks on od on cmos.
I am running everything on stock settings, except for the DDR voltage which is at 2.1v and the timing which has been set to 4-4-4-12. Bios version is 15.
What I would like to know is
Have I just been unlucky in blowing my 7800GTX and 2Gb ram, or is there something else causing components to fail. I have requested an RMA for the Xms2, should I also raise one for the Mobo?
Thanks