Abit IN9 32X MAX BLue Screens!

[Shark00nPT]

Hey guys!
I was having some trouble with my Windows Vista, USB devices were not detected, and suddenly I started having random BSODs to the point where it wouldn't even boot.

So, yesterday I decided to format my system and install a fresh copy of Windows Vista. But, because I have 4GB of RAM and some people say there is some trouble installing Vista with all of them installed I removed 2GB and began the installation.
First I formated and installed a fresh copy, when in the Desktop I downloaded all the updates and installed them, then I reboot the system and then I turned it off.
Now I installed the other 2GB of RAM and booted the system up, configured everything in the BIOS to the 4GB definitions (Increased FSB VTT, Chipset and RAM voltage) and saved it. When it gets to the Windows Vista loading "bar" it crashes! Something about "IRQL_NOT_LESS_NOR_EQUAL".

I really need you help guys, thank you very much!

[Shark00nPT]

The PC is booting, but when I'm aproximatelly two minutes in, BSOD...

[Shark00nPT]

Help!

[BUFF]

check RAM voltage settings.
Also run memtest on the RAM - 680is have a bit of a reputation (deserved or not) for killing RAM

[Shark00nPT]

check RAM voltage settings.
Also run memtest on the RAM - 680is have a bit of a reputation (deserved or not) for killing RAM

Rams are fine:

Voltages are at:
FSB VTT - 1.40V
Chipset - 1.45V
RAM - 2.225V

[Shark00nPT]

Installed EVERY WINDOWS UPDATE AVAILABLE!

But everytime I install the other 2GB... it crashes!!


I REEEEEALLY NEED HELP!

[Bashball]

I had a lot of BSOD with my ram, I cured it by manually slowing the memory timings, the recommended timings were 5-5-5-18 and I changed them to 6-6-6-20, hardly ever crashes now.

[Nickg]

Hey guys!
I was having some trouble with my Windows Vista, USB devices were not detected, and suddenly I started having random BSODs to the point where it wouldn't even boot.

ownloaded all the updates and installed them, then I reboot the system and then I turned it off.
Now I installed the other 2GB of RAM and booted the system up, configured everything in the BIOS to the 4GB definitions (Increased FSB VTT, Chipset and RAM voltage) and saved it. When it gets to the Windows Vista loading "bar" it crashes! Something about "IRQL_NOT_LESS_NOR_EQUAL".

I really need you help guys, thank you very much!

Yep exactly the same issue here, same BSOD at the same point in windows boot squence with 4GB Ram. Only difference is i have an Abit FP-IN9 SLi.

i am using Vista Ultimate 64.

EDIT FIXED NOW WORKS FINE!

4GB RAM BSOD Vista Fix - Overclock.net - Overclocking.net