AN9 32x Need help

[Nickiss]

I just bought a fatal1ty an9 32x mobo from newegg. I built my system fine, but I keep getting the following error sequence

"C1 - C3 - 01"

I called ABIT, and after an hour, they decided it was the mobo. So I shipped that one back, and got a new one. Same errors. I think it might be the OCZ memory. I have OCZ Gold 2GB (2 x 1GB) 240-Pin DDR2 SDRAM Unbuffered DDR2 800 (PC2 6400) Dual Channel Kit System Memory.

Anyone know if theres a compatibility issue.

[scotland21]

Sounds like a memory problem, maybe the memory needs more voltage as I have issues with the same board but different memory from OCZ.
OCZ have a support forun here www.bleedinedge.com/forum/forumdisplay.php?f=46
You may get into the bios by installing only 1 ram module or as I did just keep restarting the pc.
I hope this helps
John

[Nickiss]

Thanks john, that forum was very useful.

The OCZ memory is on its way back to newegg, and i'm looking at corsair and kingston memory atm.

Can someone direct me to any memory that will deffinately work with the an9 32x sli?

I just want my computer to work

[scotland21]

http://www.abit.com.tw/page/uk/mothe...AM2&DEFTITLE=Y
on the right hand side you will see test reports click on that and the click on memory.

[Nickiss]

they don't have too much of the ddr2 800 tested yet

but thank you for that link, its also proving very helpful

[tletourneau]

Hello,

I am running Corsair XMS2 Twin2X2048-6400C4 in my AN9 32X and it works just fine .

Tom