Right now the only place I can find is abit usa which is of course not the sanest thing to do. I need an I/O shield along with an SLI bridge for my AN8 SLI motherboard. Can anyone help me on this?
Printable View
Right now the only place I can find is abit usa which is of course not the sanest thing to do. I need an I/O shield along with an SLI bridge for my AN8 SLI motherboard. Can anyone help me on this?
All you need to do is send us three things.
1. A covering letter stating which parts you require.
2. A postal order (made payable to Universal abit)
3. A self addressed stamped Jiffy bag.
Send all three items to:
Universal abit
Unit 3
24-26 Boulton Road
Stevenage
Herts
SG1 4QX
Price list:
Northbridge fans - £6 each
SLI switch/Bridge - £6 each
New bios chip - £18 each
Reprogramed bios chip - £12 each
Audio max cards - £15 each
I/O sheilds - £6 each
CPU HSB 754/939 £6
CPU HSB AM2 £6
All prices include VAT.
Never Ever Buy from Eversham Technologys Or Lowestonweb.com as they are the worst people to buy off, believe me. Low price but useless return policy. Never BUY. YOU HAVE BEEN WARNED
Do you sell BIOS Chips for the AWD9-MAX?
Also how long does it usualy take for you to send them?
Ok did'nt know where to ask this so here it goes, I'm basically after the PWN heatsink that comes with the AB9 Quad-GT not the whole lot with the heatpipes and northbridge heatsink just the PWN heatsink if these are advailable who do I have to contact as I'd sell and arm and leg for it as theres nothing else on the market for it apart from those tiny RAM sinks.
Sorry no AB9 quad GT parts avaliable at the moment.
Any chance of helping us water coolers out?
When the IP35 comes out, can you get the bare heat sinks in (PWM and SB mainly) so we can take off the heatpiped sinks that come with the higher-end boards?
The lower end IP35 comes with these, while the middle and high end versions use heat piped versions.
http://www.abit.com.tw/upload/produc...-e_top_500.jpg
Can ABit supply the new PCI-E Wi-Fi modules and is there a way of getting them shipped to Australia?
I can offer support for people in the UK. You would need to contact someone who deals with Australia.
Does that mean I won't get any technical questions etc that I ask here answered either? Thats kinda harsh as we don't really have much in the way of local brand representation down here so we need to rely on people in the US/UK for a lot of that stuff, its bad enough dealing with the time zone differences :(
I can understand you not being able to ship product to the other side of the world though.
I have no problem offering anybody technical support. But there are less things I can offer for people outside the UK. For example I can\'t offer RMA services, part sales etc. But im more than happy to answer any of your questions.
Awesome, thanx Sean. Parts generally aren't so much of an issue for us anyway, being closer to Asia and all, and can usually just RMA product back to our resellers... but sometimes getting expert advice from someone who speaks English can be al little difficult!
Hi Sean,
I've just frigged my fp-in9 sli trying to use flashmenu and the new beta 13 bios. (It hung while re-programming the main block, so seems fairly terminal!)
Does that need a new bios chip, or just a reprogrammed one? If it's reprogrammed, do I just stick the chip in a jiffy bag with the £12?!
thanks very much!
New Abit parts shop for the EU :D
http://www.abitshop.eu/
How annoying - last I checked we we're part of the EU! Actually it's not that big a deal as they don't seem to have any of the heatsinks either :S
Hi Sean, could you tell me if you have any replacement fans for Siluro 5800 gfx cards please, and is the the same £6.
Thanks
hi sean
can i order a OI Shield?
and do u accept paypal for payment lol ?
im living in UK
thanks got it now
hey guys i got a problems recently flashed my bios to the 12b06 from the stock 1.0 bios and now my computer took a crap and freezes at boots screen. i took my battery out ram out vid card out and tryed to reset the bios and would not work. is there any fix to this. or getting another bios on another way??
Hi Sean
Do you have UL8 and AN8 Ultra i/o shields available ?
and is there any limits on how many I can purchase ?
Sean, got an OTES RAMflow & if so, how much?
Send me an email at sean@abitcomputer.co.uk might be able to sort out a deal for those qty.
hello
are you able to get a new fatal1ty an8 sli motherboard retail box or atleast all the bits
regards Anthony Smith
Sorry that model has been discontinued.
hello
are you able to get, 1x adiomax 7.1 card, 1x sli bridge, 1x sli switch, 1x i/o sheild
Kind regards Anthony Smith
PS also are you local to cardiff in the uk
sorry forgot to ask will this board work without the sli switch if only using a single graphics card
ant
hello
what the problem is, i bought this board from ebay, listing said new, recived today and it is missing parts listed and its obviosly not new( usage dust in fans ets). i would keep if seller agree's to a patial refund. but because the board will not work without swithch i have no way to test if it even works.
do abit make any other skt939 boards which are sli
regards ant
AN8 SLI (non fatality), AN8 32X and the KN8 SLI. All of these models are now discontinued.
hello
are you able to take paypal
ant
Sorry no paypay. If you want to make a order for a old abit motherboard please make a request to technical@abitcomputer.co.uk Please note that old 939 SLI motherboards are rare and we may not have any in stock.
Hi Sean
I made an enquiry a week or two back and you said you would contact me , but so far no reply !
Any way to speed up the process ? :help:
Hi, do you have any northbridge fans suitable for an NF7 in stock please.
Thanks,
Throdd
Hi Sean
I have made a bank transfer for my order , but cannot email you (it bounces saying your mailserver is not accepting mail). Here is my requirement:
9 x AV8 3rd Eye
6 x UL8
4 x AV8
2 x AN8-ULTRA
2 x AN7
23 I/O Shields in total
I need to give you the delivery address but have no way to contact you ATM to give you the delivery address ..
Thanks
Warchile :juggle:
Send an email to my hotmail sean-abit@hotmail.co.uk
Hi Sean. I'm sure you're aware that the IDE CDROM drive disappears after running memtest86+ since bios 15. Almost every AW9DMAX owner is having this problem. Any chance of fixing this.
Regards
fadsarmy
Hi Sean
Can i fit the guru panel that fits in the drive bay to the IP35 pro i have just purchased and if so can you supply the panel.Had one back in the old days (lol) was really useful
I am looking for an I/O shield for an Abit A9WD MAX - can you confirm their existence before I go through the rigmarole of ordering!
how can i buy the bios chip of F-I90HD MATX?, i had problems with this motherboard, it boots but after that it's appearing vga ati on screen and nothing happen freeze. please help.
cpu: x3210 quad xeon lga775
ocz 6400
graphic: the one in built
if you are in the UK http://forums.hexus.net/974881-post2.html
have you got the RAM voltage set properly though?
hmm the default one, i didnt touch anything bout memory voltages
you will probably find that OCZ RAM needs more than the JEDEC spec. 1.8V that the mobo probably sets by default.
If you have 2 DIMMs try with just 1 installed.
hey, im about to purchase an abit awd9-max with an e6750 - coupla things:
1. was surfing around everywhere to find out a cooler compatibility list for this board (thats the first thing i'm after).
2. I saw a few posts about bios problems and suchlike....If i'm about to buy this board, is it going to be the latest bios on it or do i have to download (or even purchase, i saw in one thread) something new.
I'm just putting together a computer for gaming and web browsing etc....everyday stuff. I may try to overclock in the future (once I learn how), but I'm not going to be putting too much stress on the board. Are the problems with the bios stuff that i'm likely to be concerned about or is it real overclocker/enthusiast stuff that I probably wouldn't even understand? :D
I have always shopped at eBuyer. Their prices have always been reasonable. Their customer service was shoddy at some points over the last few years but i think it has improved.
Now that the abit UK office is closed I would suggest that you purchase all replacement parts from Abit shop
I can offer support for people in the UK. You would need to contact someone who deals with Australia.
sorry no idea.
ya its very interesting.
reported...
you've already had loads of spam deleted...
!!! i take it you are going to spam to 5 and then posts links to SEO...
just saw post on abit shop, i will get it there for 15 Euro.
what's this then? ;)
http://www.abit.com.tw/page/en/mothe...RODINFO=Manual
Taiwan worked OK for me the other day & because it did I didn't bother trying the other 2.
try to find on amazon maybe you can find there..
Nice to know we can still get parts somewhere! I was really sad when I heard Abit was going down... I love my boards.
Hi, could someone confirm that ABIT RMA still works? I recently purchased my #4 AB9 Quad GT, this one with permanently short-circuited EZ CMOS switch. Because there are no remaining units for exchanges in Czech Republic, I have two options (other than ask my cheap purchase cost back) - try to find dead mobo with EZ CMOS switch and unsolder it, or direct RMA with ABIT. On global website I can't find any RMA adress, there's only support centre adress for Europe:
Universal ABIT NL B.V.
Jan van Riebeeckweg 15, 5928LG , Venlo, The
Netherlands
Is it where I should send my mobo to RMA? Thank you.
it's where you can open a discussion with them re. RMA - you can't just send it in without prior authorisation & expect to get anything back.
Found the Lv....
[quote name='Lvcoyote' date='Sep 22 2009, 02:42 PM' post='79503']
I think what your referring to Wolf is when I had a AX78 sent to me by abit. It arrived with a broken cmos switch at the back I/O area. I simply removed the switch all together and soldered the two pins needed for normal operation together, fixed it that way. I never did replace a CMOS switch.
Yea, I did post pics at the abit forum...... having trouble finding them???...... LMFAO!! :hysterical:
Basically when you remove the switch assembly you will see the three contacts that the switch uses, all you have to do is solder together the two that the switch uses in normal operation position.
[/quote]
Use something make shift to touch the pins to find correct ones & do as stated. Then you can use the normal onboard jumper when you need to clear.
Ok, good to know.
Yes, I thought that way too. But the thing is that after 3 previous defect ones (#1 loud buzzing, #2 DoA and #3 S3 resume problem), when probably all of few AB9 Qs (except one owned by my friend) ever delivered to Czech Republic passed my hands I would like once for all to be in possesion of 100% condition unit. For me this is a matter of sentiment :) Anyway, thank you for answer.
I have problems updating my bios from the first version. I have put a help request on the forum with no reply so far.
If all fails would I be better buying a new bios or just get my one reprogramed? and If i get a new bios is it
pogramed with ther latest version?
hi guys does anyone know where i can buy a AudioMAX 7.1 card from in the uk i tried order one from the abit shop and they say they do not sell them any more if anyone can help i would appreciate it rob
hi ive got a soundMAX card now but i think my bios is gone all funny because my graphics cards wont work with the board i can get a picture from the s-video on the graphics card but not the dvi would i be better of buying a new bios ? or new mainboard thanks rob
I've tried both Windows and Dos and both fail.
I get this error message...
"The model of your M/B does not in the support list"
ps... The poor English in the error text, that's how it is. lol
I see the bios for board is 15, 14, 13 etc.
Try and write 13 (m622a13.zip) to the rom using windows & dos.
If that fails you can use switches in the dos flash program to bypass the errors.
See if option one works first :)
What happened?
Just to make sure you have "BIOS IN9 32X MAX V1.0, V1.1"
It is V1 or V1.1? They are not keeping the web side maintained, you might have V1.5.
I find that unforgivable, even PCCHIPS was better!!! :angst:
Abit site working for me at 7K which is wrong on SOOOOOOOOO many levels!
It is....
IN9 32X MAX V1.0
btw... What would the switch be to force a bios upgrade?
Yep it's ok
AWDFLASH.EXE /F
Did the trick ;) but thanks for the help anyway.
Now too see what the best cpu will fit in ;)
No probs,
Did they catch the b'stards? :angst:
keeping finding:):)
Hiya,
Got my Abit IX48 - the User Manual describes installing uGuru as well as the (supposedly supplied) clip for the (optional) fan for the rear heatsink.
I cannot find anything in the box for the uGuru connections (no cable) or where to plug the other end in if I had them.
Is the uGuru cable/panel an optional extra or should it have been included in the retail box?
There wasn't any fan clip either. Does this also have to be purchased separately or should that also have been included in the box?
If I have to buy these separately, do you have them in stock and what are the prices please?
The uGuru clocks and panel are optional extras and can be found on ebay sometimes. The fan clip was missing from the box and were meant to be available direct from abit but we never received the shipment. There was a whole thread about it 2 years ago but nothing got resolved before abit closed.
Thanks for that Sean. At least I got what was supposed to be in the box! lol
Can you shed any light on the other post I made - IX48 & DDR3 Rams? :help: :wallbash:
AT the mo I have a nice mobo, reasonable graphics card, burners, HD's etc.... all installed in a nice light-show case - but it's all a pile of junk and useless coz I can't boot the damned thing!! :censored:
There is a compatibility list on the abit website but it seems to be down at the moment or forever. The problem is the IX38 and the IX48 were the first and I think the last motherboards with DDR3 support. Very little testing was done and a lot of improvements to the technology has been made since the last bios update.
Its more than likely the issue you have is due to memory voltages, the only thing I can suggest is disconnecting everything apart from CPU and 1 dimm is slot 1, reset the bios and power on.
When i got my iX38 the clip was missing aswell......and iirc Sean, you posted me one out when Abit was still alive.
Hi, Guys,
I got a IP camera ( APM-J012-WS) as birthday gift from my boyfriend, and I had tried to open the cam via IE browser. Fantastic, it is worked well!
It is also heard that the IP cam can work with mobile phone, so my sister used her IPHONE to test it. However, it seems that some functions do not work well. If anybody can tell me which functions can not work when mobile phone viewing?
ANSWER SAMPLE:
For APEXIS MJPEG series IP Cameras, it works well with Mobile phone directly from IE browser, and it also supports IPHONE APP, I have down load the “Apexis IP Control” already from Apple’s website.
would you have any northbridge fans/coolers hanging around for a Abit IC7-MAX3? if not could you suggest an alternative aftermarket one as the fans noisy on this mobo.
Terry
Why don't you check ebay? Any IC7 series fan will fit if your motherboard if it is using a metal style northbridge heatsink.
Just search IC7 fan. Theres quite a few vendors to choose from.
@ Abit Sean
Please have a look in the thread about Bios updates for E0 support.
The links are dead.
Can you provide working links ?