Antec Skeleton Problems.

[wad67]

I have several issues with my antec skeleton computer,
It is quite noisy, The fans tend to scream and the case rattles with the side covers on.
The fan lights are a tedium to turn off every time the computer starts, as I have to press the cycle button about 12 times, normally lights are not a hassle, except when they are psychedelic and come close to inducing seizures.
How may I decrease fan speed, and permanently turn off the lights.

[Support@ANTEC]

Dear wad67,

The only way to turn off the top fan LEDs is to cycle through the different modes until you reach the off state. The top fan can be controlled with three setting LOW/MED/HIGH and should be barely audible when set on LOW or MED. There is a little switch to do that which is located near to the LED color cycle switch at the rear.

Here is a link to the manual of the Skeleton: http://www.antec.com/pdf/manuals/Skeleton_manual_EN.pdf

Best regards,

ANTECsupport

[wad67]

I have solved the problem, by cutting the cables to the fan and the lights.

[Tact.X]

I have solved the problem, by cutting the cables to the fan and the lights.

A bit drastic surely?