Antec 1200 w/ H60/Kuhler 620

[Killaban]

Hey all I recently finished building my first PC and am curious about adding a CPU cooler. I have always eyed the H50 and just found out an H60 came out. I also noticed the Kuhler 620 from Antec is available and am looking for information about putting them into a Antec 1200 in reference to the side optional fan apart of the side panel.

I am wondering by installing these coolers will I still be able to keep the side fan in or remove it because they will block one another? Both have the same dimensions as far as I can tell with the radiator installed so any help on this is greatly appreciated!

[Yellowbeard]

On either the H50 or the H60, the radiator is no wider than a 120mm fan. So, if you mount it with the hoses either at the top or the bottom, you should be fine assuming your back panel of your case is sized for 120mm+ fans.

[robert3892]

I've installed several H60s for several friends and I have an H70 in my own Corsair 600T White Special Edition and the fit is fine. Prior to that I had my H70 in an Antec 900 and I managed to make it fit and the Antec 900 is smaller than your Antec 1200. With Corsair you're also going to have really good quality.

[Antec_Don]

Killaban, our Antec Twelve Hundred will support the Kuhler 620 but it can only be installed on the bottom exhaust fan and it will also block the first expansion slot.

[Killaban]

are you referring to the optional fan on the side panel in terms of blocking?

[Antec_Don]

Killaban, When installed, the kuhler 620 will not interfere with the side optional fan.