TwinX 4GB TWIN2X4096-6400C5
I have ordered the 2*2gb pack and I have the Gigabyte DS3 P965 Rev.1 - now should I be ok?
I have tried the 4*1gb sticks and it didn't work (application crashes etc).
Bare in mind that I have a Q6600 @ 3.2 (400*8) and the F12 bios.
Re: TwinX 4GB TWIN2X4096-6400C5
Yes, in general 2 x 2gb should be much easier to tune than 4 x 1gb.
Re: TwinX 4GB TWIN2X4096-6400C5
I also going to update to TwinX 4GB TWIN2X4096-6400C5, but i have read in corsair site that this RAM is not advided for 32 bit OS.
i want to know what they means by "not advised" , either tot work the RAM will not work at all, or it will work but the windows will show it around 3 GB ?
Re: TwinX 4GB TWIN2X4096-6400C5
Quote:
Originally Posted by
Voodoo54
I also going to update to TwinX 4GB TWIN2X4096-6400C5, but i have read in corsair site that this RAM is not advided for 32 bit OS.
i want to know what they means by "not advised" , either tot work the RAM will not work at all, or it will work but the windows will show it around 3 GB ?
You have hit the nail on the head. The memory will work fine but, the usable amount will be approximately 3gb due to the limits of the 32 bit OS.
Re: TwinX 4GB TWIN2X4096-6400C5
OK,
i have got TwinX 4GB TWIN2X4096-6400C5, nut Win xp 32 bit is showing only 2 gb although i have enabled "memory remapping" in bios,
i read that editing "boot.ini" using PAE will let xp 32 bit shows around 3 gb, but i don't know how to edit this file,
however i am observing improvement while loading heavy applications,
windows xp 64 bit and vista 64 bit both are showing 4 gb
Re: TwinX 4GB TWIN2X4096-6400C5
Think I'm going to get the same RAM as you with 64bit Vista, hopefully it should be ok...
Re: TwinX 4GB TWIN2X4096-6400C5
ok,
i ran this ram at 4-4-4-15 @ 2.0 volt without any problem, i think with little more try i will be able to run it near 4-4-4-12 , the default is 5-5-5-18,
Re: TwinX 4GB TWIN2X4096-6400C5
Quote:
Originally Posted by
Voodoo54
OK,
i have got TwinX 4GB TWIN2X4096-6400C5, nut Win xp 32 bit is showing only 2 gb although i have enabled "memory remapping" in bios,
i read that editing "boot.ini" using PAE will let xp 32 bit shows around 3 gb, but i don't know how to edit this file,
however i am observing improvement while loading heavy applications,
windows xp 64 bit and vista 64 bit both are showing 4 gb
Edting the PAE in XP will not make any noticeable difference. I have been told that MS disabled this feature. Regardless, you cannot use all 4gb of installed system memory with 32 bit Windows, Vista or XP. You will need to use the 64bit version.
Re: TwinX 4GB TWIN2X4096-6400C5
Quote:
Originally Posted by
Voodoo54
ok,
i ran this ram at 4-4-4-15 @ 2.0 volt without any problem, i think with little more try i will be able to run it near 4-4-4-12 , the default is 5-5-5-18,
finally i have reached 4-4-4-12 @ 2.0 volt,
another thing the Rev. of my RAM is 4.xx, can any one tell me the IC of this RAM, weather is MICRON, PROMO, etc....
Re: TwinX 4GB TWIN2X4096-6400C5
Look in the stickies in this section for Memory Resources. The IC listing links are there.
Re: TwinX 4GB TWIN2X4096-6400C5
Quote:
Originally Posted by
Yellowbeard
Look in the stickies in this section for Memory Resources. The IC listing links are there.
IC of Twin2x4096 C5DHX is not listed in these links,
Re: TwinX 4GB TWIN2X4096-6400C5
Quote:
Originally Posted by
Voodoo54
IC of Twin2x4096 C5DHX is not listed in these links,
Please read the thread; from RAM GUY:
Quote:
If for some reason you dont see your modules listed please post your complete part# and lot code.
To accurately find out which ICs are in which memory, the following is needed:
Part # Revision # Lot #