Problems with icybox nas4210-b

[Crazy ivan]

I got an icybox nas4210b for my birthday.. I when thoufh the set up following the manual.. Formated the hard disk bout couldnt set up users. I desided to start from the start and reset to factory settings..
BIG mistake. I hut the reset to factory settings button and now cant log into the Drive.
When i search for it useing the utility on the CD it no longer comes up as IB-NAS4210-B. It says "stornas" and no matter what password I put in with the admin password i cannot get into it.
Can someone please HELP me ?

I have a 1TB seagate HDD installed in the icy box... If you need any information please just ask

Thanks for all your help.....

[gettler.andras]

I've got a similar situation, the NAS didn't accepted my password. The solution is simple: Connect the NAS to your PC via USB and delete all the partitions on the NAS' hard disk. You can use either the windows disk management tool (Control Panel> Administrative Tools> Computer Management) or any other partition management software (for example Paragon Partition Manager). This maneuver erases all the datas on your NAS' hard disk, so you can start the initilalization again.

[Crazy ivan]

thats it thanks your better than support from icybox took them 4 dayd to give me that solution

[gettler.andras]

Upgrading NAS' firmware to 2.6.3.1 is also recommended, because NAS with 2.6.3 often forgets the admin's password and don't let you log in to the webadmin interface. You can download the latest version from the raidsonic.de site.

[Crazy ivan]

Upgrading NAS' firmware to 2.6.3.1 is also recommended, because NAS with 2.6.3 often forgets the admin's password and don't let you log in to the webadmin interface. You can download the latest version from the raidsonic.de site.

way ahead of you on that did that as soon as i got back in, everything seems to work ok now..
thanks for your help