Page 1 of 2 12 LastLast
Results 1 to 16 of 17

Thread: ASRock Dual SATA and x800 gto pcie problems

  1. #1
    Senior Member
    Join Date
    May 2004
    Location
    Oxford
    Posts
    839
    Thanks
    47
    Thanked
    20 times in 18 posts
    • wazi's system
      • Motherboard:
      • P8H61-M PRO
      • CPU:
      • i3
      • Memory:
      • 8gb
      • Storage:
      • 6tb
      • Graphics card(s):
      • GEFORCE 650 GTX
      • PSU:
      • antec trupower
      • Case:
      • antec
      • Operating System:
      • win 10
      • Monitor(s):
      • LG
      • Internet:
      • 100 MB VIRGIN

    ASRock Dual SATA and x800 gto pcie problems

    this board has been working perfectly well with my 9800 se aiw agp, i brought one of the powercolor x800 128 gto pcie , and i and haveing some serious issues, once the pc boots up and starts loading windows desktop it just freezes !!!!its driving me mad, there isnt a update on asrocks site for pcie slot, and im kinda lost , has anyone else had same probs and sorted it out? i need help plz,

  2. #2
    Registered+
    Join Date
    Apr 2006
    Posts
    23
    Thanks
    0
    Thanked
    0 times in 0 posts
    Have you put the latest bios on the board? Even if they don't mention a specific fix for pci-e it probably can't hurt.

    Did you uninstall the ati catalyst drivers before putting the new card in? If you didn't then the driver could be getting confused expecting a 9800 agp and locking up. Try booting into safe mode (F8 whilst system is booting), uninstall the driver, reboot and reinstall the ati drivers.
    Last edited by drbob; 01-05-2006 at 03:09 PM.

  3. #3
    ***** Lurker
    Join Date
    Aug 2005
    Posts
    724
    Thanks
    2
    Thanked
    15 times in 15 posts
    • d3fiant's system
      • Motherboard:
      • GB X58A-UDR3 FB11
      • CPU:
      • Core i7 950
      • Memory:
      • Corsair 12GB DDR3 1600
      • Storage:
      • 2x 120GB OCZ Agility SSD + 500GB SP F3
      • Graphics card(s):
      • GB Windforce GTX670 2GB
      • PSU:
      • 850W Akasa
      • Case:
      • Fractal R3
      • Operating System:
      • Windows 7 x64 HP Retail
      • Monitor(s):
      • 24" 1920x1080 Iiyama LED
      • Internet:
      • 60MB VM
    this may sound stupid but do u need to change jumpers to switch between AGP and PCIe, I know u do to use the upcoming AM2 socket converter on that mobo, just a thought

  4. #4
    Senior Member
    Join Date
    Apr 2006
    Posts
    859
    Thanks
    6
    Thanked
    8 times in 8 posts
    No jumpers for AGP -> PCI-E in the manual.

    Try booting into safe mode, then uninstalling the chipset drivers (specifically the GART driver). Then re-install it. Sounds like it's definately driver related.

    If all else fails, a fresh install should do the trick.

    Finally, if you are overclocking, make sure that the PCI-E bus is running at 100.

  5. #5
    Senior Member
    Join Date
    Apr 2006
    Posts
    679
    Thanks
    13
    Thanked
    43 times in 43 posts
    I don't think a reinstall of the os is necessary but you should uninstall the graphics driver then restart and let windows detect the card and then install the ATI drivers.

  6. #6
    Senior Member
    Join Date
    May 2004
    Location
    Oxford
    Posts
    839
    Thanks
    47
    Thanked
    20 times in 18 posts
    • wazi's system
      • Motherboard:
      • P8H61-M PRO
      • CPU:
      • i3
      • Memory:
      • 8gb
      • Storage:
      • 6tb
      • Graphics card(s):
      • GEFORCE 650 GTX
      • PSU:
      • antec trupower
      • Case:
      • antec
      • Operating System:
      • win 10
      • Monitor(s):
      • LG
      • Internet:
      • 100 MB VIRGIN
    tried that

  7. #7
    Registered+
    Join Date
    Apr 2006
    Posts
    23
    Thanks
    0
    Thanked
    0 times in 0 posts
    Shot in the dark: Have you made sure the video card cooling fan is running? It could be overheating and locking up.Also do you have the chipset drivers installed? The latest version is 2.20, get it here.

    BTW.. on your "My System" specs you say you have 1Ghz RAM, I think you mean 1Gb - Ghz is short for Giga-hertz, (a measure of the speed a chip runs at). We'll probably see 1Ghz RAM in mainstream systems one day - DDR2-833 isn't far off...but not yet :-)
    Last edited by drbob; 08-05-2006 at 10:45 PM.

  8. #8
    Syd
    Syd is offline
    Hanging on the Edge Syd's Avatar
    Join Date
    Jan 2006
    Location
    Kent
    Posts
    1,700
    Thanks
    86
    Thanked
    44 times in 38 posts
    • Syd's system
      • Motherboard:
      • EVGA 760 Classified / X570S Tomahawk / gigabyte gaming 7 1150
      • CPU:
      • I7 920@3.8 / 5800X / 4790k
      • Memory:
      • 18GB Dominator DDR3 1600 / 32GB Crucial 3600 / 16GB GSill
      • Storage:
      • 980pro Nvme / Sam840's/ Sam SM951
      • Graphics card(s):
      • 690GTX on Water/ 1080ti
      • PSU:
      • AX860/1250w Seasonic
      • Case:
      • TJ07 / PCV700
      • Operating System:
      • 10 64/ 10 64
      • Monitor(s):
      • NEC 30” 3090 + ASUS 27 144HZ 1440p IPS
      • Internet:
      • Sky Fibre pro
    Quote Originally Posted by d3fiant
    this may sound stupid but do u need to change jumpers to switch between AGP and PCIe, I know u do to use the upcoming AM2 socket converter on that mobo, just a thought
    No I just swapped from a AGP to a PCIe and it just worked,,,,,,,,,,,,,, I did delete the Nvidia driver first though.

  9. #9
    Senior Member Mithrandir's Avatar
    Join Date
    Sep 2005
    Posts
    2,746
    Thanks
    461
    Thanked
    367 times in 185 posts
    • Mithrandir's system
      • Motherboard:
      • Biostar TP45-HP
      • CPU:
      • C2D e4600 (w/ Xigmatek Red Scorpion)
      • Memory:
      • OCZ ReaperX (2x2gb)
      • Storage:
      • Samsung F1 500gb
      • Graphics card(s):
      • xfx 9600gt Alphadog edition
      • PSU:
      • Xigmatek NRP-MC651
      • Case:
      • Coolermaster Cavalier 3 silver (windowed)
      • Monitor(s):
      • Fujitsu Siemens SCALEOVIEW D22W-1
    Not really sure, but I built my system from scratch and I remember going into the BIOS to select the graphic card slot to PCIe, there are options for AGP and PCI. Make sure this has been done.

    Oh BTW my X800gto is Connect3D. Also not sure if you're card needs additional power as my X800gto needs extra power.

    My Asrock 939Dual sata2 mobo has firmware 1.20, apparently this is most stable but I think newer boards being shipped may come with a higher firmware revision.

    sorry for the vague answers.
    Cavalier-X: Biostar TP45-HP ¦ E4600@3.1ghz - Xigmatek Red Scorpion (OCZ Freeze) ¦ OCZ ReaperX 2x2gb (792mhz @ 4-4-4--12) ¦ Xigmatek NRP-MC651 ¦
    Palit 8800gt ¦ X-fi Fatal1ty Gamer ¦ Coolermaster Cavalier 3 (Silver/Windowed) ¦

    Poseidon Magma: MSI P45 Zilent ¦ E6300@3.0ghz - Coolermaster Hyper 212 (MX-2) ¦ Corsair 2x2gb (880mhz @ 5-5-5-15) ¦ Corsair HX450w ¦
    xfx 9600gt Alphadog edition (780/1950/1000) ¦ X-fi Gamer ¦ Gigabyte Poseiden ¦

  10. #10
    Senior Member
    Join Date
    May 2004
    Location
    Oxford
    Posts
    839
    Thanks
    47
    Thanked
    20 times in 18 posts
    • wazi's system
      • Motherboard:
      • P8H61-M PRO
      • CPU:
      • i3
      • Memory:
      • 8gb
      • Storage:
      • 6tb
      • Graphics card(s):
      • GEFORCE 650 GTX
      • PSU:
      • antec trupower
      • Case:
      • antec
      • Operating System:
      • win 10
      • Monitor(s):
      • LG
      • Internet:
      • 100 MB VIRGIN
    ive done all that , my bios is 1.90
    as for extra power i cant as nothing to connect power too its powercolor
    all i can think of is sending back mobo and spending a lil more and NEVER buying ass-rock products again

  11. #11
    Senior Member Mithrandir's Avatar
    Join Date
    Sep 2005
    Posts
    2,746
    Thanks
    461
    Thanked
    367 times in 185 posts
    • Mithrandir's system
      • Motherboard:
      • Biostar TP45-HP
      • CPU:
      • C2D e4600 (w/ Xigmatek Red Scorpion)
      • Memory:
      • OCZ ReaperX (2x2gb)
      • Storage:
      • Samsung F1 500gb
      • Graphics card(s):
      • xfx 9600gt Alphadog edition
      • PSU:
      • Xigmatek NRP-MC651
      • Case:
      • Coolermaster Cavalier 3 silver (windowed)
      • Monitor(s):
      • Fujitsu Siemens SCALEOVIEW D22W-1
    Have you tried the powercolor on another mobo? It might be faulty (esp since your 9800 has been working well)

    Othwise I guess component incompatabilities.
    Cavalier-X: Biostar TP45-HP ¦ E4600@3.1ghz - Xigmatek Red Scorpion (OCZ Freeze) ¦ OCZ ReaperX 2x2gb (792mhz @ 4-4-4--12) ¦ Xigmatek NRP-MC651 ¦
    Palit 8800gt ¦ X-fi Fatal1ty Gamer ¦ Coolermaster Cavalier 3 (Silver/Windowed) ¦

    Poseidon Magma: MSI P45 Zilent ¦ E6300@3.0ghz - Coolermaster Hyper 212 (MX-2) ¦ Corsair 2x2gb (880mhz @ 5-5-5-15) ¦ Corsair HX450w ¦
    xfx 9600gt Alphadog edition (780/1950/1000) ¦ X-fi Gamer ¦ Gigabyte Poseiden ¦

  12. #12
    Senior Member
    Join Date
    May 2004
    Location
    Oxford
    Posts
    839
    Thanks
    47
    Thanked
    20 times in 18 posts
    • wazi's system
      • Motherboard:
      • P8H61-M PRO
      • CPU:
      • i3
      • Memory:
      • 8gb
      • Storage:
      • 6tb
      • Graphics card(s):
      • GEFORCE 650 GTX
      • PSU:
      • antec trupower
      • Case:
      • antec
      • Operating System:
      • win 10
      • Monitor(s):
      • LG
      • Internet:
      • 100 MB VIRGIN
    tried it in dell setup and no problems, assrock have just mailes back saying they have tested it with no problems (which is lies ) coz im not the only one who is crying about this

  13. #13
    Registered+
    Join Date
    Jan 2006
    Posts
    36
    Thanks
    0
    Thanked
    0 times in 0 posts
    what PSU do you have? It could be not enough juice for the new card once it begins loading into Windows...just a thought, the X800GTO will draw more than the 9800Pro.

    Matt

  14. #14
    Senior Member
    Join Date
    May 2004
    Location
    Oxford
    Posts
    839
    Thanks
    47
    Thanked
    20 times in 18 posts
    • wazi's system
      • Motherboard:
      • P8H61-M PRO
      • CPU:
      • i3
      • Memory:
      • 8gb
      • Storage:
      • 6tb
      • Graphics card(s):
      • GEFORCE 650 GTX
      • PSU:
      • antec trupower
      • Case:
      • antec
      • Operating System:
      • win 10
      • Monitor(s):
      • LG
      • Internet:
      • 100 MB VIRGIN
    antec 350w smart power

  15. #15
    Senior Member
    Join Date
    Jan 2006
    Location
    Northampton
    Posts
    319
    Thanks
    1
    Thanked
    7 times in 7 posts
    • ash_rm's system
      • Motherboard:
      • Gigabyte P35-S3
      • CPU:
      • E4300@3.2GHz
      • Memory:
      • 2x 2GB Corsair
      • Storage:
      • 320GB WD & 80GB Maxtor
      • Graphics card(s):
      • 7600GT
      • PSU:
      • Seasonic S12 380W
      • Case:
      • Antec Solo
      • Monitor(s):
      • DGM 24" (1920 x 1200)
      • Internet:
      • Be (~ 3mb)
    Did you say you tried re-installing windows? Worth a try, could do it on another hard drive if you have another one available just to confirm it's not windows being funny.

  16. #16
    Senior Member
    Join Date
    Aug 2003
    Posts
    326
    Thanks
    0
    Thanked
    0 times in 0 posts
    • Curly's system
      • Motherboard:
      • Asrock 939-Sata 2
      • CPU:
      • Opteron 165 @ 2.52
      • Memory:
      • 2gb Geil Value Ram
      • Storage:
      • 900gb in various HD's
      • Graphics card(s):
      • 7800 gtx
      • PSU:
      • Hiper Type-R 580W
      • Case:
      • Globalwin
      • Monitor(s):
      • Samsung syncMaster 205BW
      • Internet:
      • 4mb Virgin Media Cable
    Have a look over at OCWB forums HERE in the asrock forum and see if theres a fix in there.

    just a thought try disabling FIFO in bios and uninstall the AGP driver in device manager as far as I know it won't be need with a PCI-E card.

    hth, Curly

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •