overclock corsair Vengeance 1600

[RayT160]

Hi Guys.. Iv a i7 930 @ 4.2 on 2.5 volts and with prime95 getting a max temp of 74.. so im happy with that!!.. instead of overclocking the memory (corsair Vengeance 1600 triple) id rather tighten the timings.. but not a clue how to go about it.. my board is a asus px58d-e if that helps.. as anyone got any settings I can try?? cheers

[RayT160]

1.25 volts I mean.. lol

[kalniel]

Well you go into the BIOS and type in tighter timings Your motherboard manual should have the BIOS instructions to tell you what does what. There should be a way of seeing the existing timings as well.

If you really want to get into it, have a read up of this article:
http://www.anandtech.com/show/3851/e...-afraid-to-ask

[RayT160]

Well you go into the BIOS and type in tighter timings Your motherboard manual should have the BIOS instructions to tell you what does what. There should be a way of seeing the existing timings as well.

If you really want to get into it, have a read up of this article:
http://www.anandtech.com/show/3851/e...-afraid-to-ask

cant get the link to work mate.. just wondering if anyone as the same memory.. and has the settings if they have tightened the timings up a little.. cheers for the reply..

[Bonebreaker777]

You can use CPU-Z for a quick memory speed and timing confirmation.
As for manual timing settings, your mobos manual says you can find it at Ai Tweeker > DRAM timings.