LinkBack URL
About LinkBacksI just bought a Xaser 3 case and am unable to get the left side panel off. Does anybody know how to remove it? And yes I already removed the screws off the back. Thanks for any help.
Xaser 3
I just bought a Xaser 3 case and am unable to get the left side panel off. Does anybody know how to remove it? And yes I already removed the screws off the back. Thanks for any help.
dont it have a lock or something? my brother has same case, sorry i cba to look & hes not in atm
hes back, there sno lock, u just push it back and pull it out, easy same as normal cases
There is a lock. Open the front panel (turn the key 180 degrees so the entire front swings open, the lock is just below the space for the flopp drive, to the left of the top fan. Also, i found the panel was exceedingly hard to slide off first time round, but it gets easier as you keep on putting it on and off. Hope this helps
Sorry guys my bad, I meant the right side of the case. I know there is a lock for the left side, but no lock for the right side. It just won't budge.
No-Name - The Name That You Can Trust
I've never managed to get the right side off. After the struggle with the left i couldn't be bothered. Why do you need to get it off? everything can be accessed from the front or the left side
I don't really need to get it off per se, I just find it easier to work in the case with both side panels off
No-Name - The Name That You Can Trust
nah, there is no need to get it off, dont worry about it, unless you really need to get it off. If thats the case i think its just lots of work 2 get it off
BTW, wat colour scheme u decide on?
I got the black Xaser. I've installed 2 blue cathodes in it with the 480 true blue antec power supply. The cables inside are black with bands of red. It'll look intense when it's done
No-Name - The Name That You Can Trust
sounds good. take it you went for the window option then. I couldnt b bothered to make it look good inside, so i went 4 the silver (aluminium) 1 with no window
I like the window, it looks intense
No-Name - The Name That You Can Trust
Hi Guys,
I am new on the block, just wanted to say how nice the Xaser III is, I have the Blue Xaser III with window...
Is there any need to ever take the other panel off?
I don't even lock the windowpanel with the thumbscrews supplied. The panel won't come off without some effort.
do any of you use all 7 fans?
----------------------------------------
XP 2800+ @3200+ (Volcano9 Coolmod)
Asus A7N8X Deluxe, Rev2.0 1003
512 (2x256)Mb of Twinmos PC3700
Maxtor 40Gb hdd
Liteon LTR 16102B
MSI GeForce2 MX400 (to be upgraded after xmas)
350w psu
Last edited by athlon_xp_2800; 20-09-2003 at 02:26 AM.
My Rig: 'Hellcat'
Asus M3A78-T
AMD Phenom II 720 @stock (for now)
2x2Gb Corsair XMS2 PC8500 c5
Maxtor 250Gb SataII, 6V250F0
Nvidia Geforce 7950GT
Pioneer DVR 110D (black)
Akasa Eclipse 62 + window panel
Corsair VX450w psu
AG Neovo HW22 tft panel
Creative P5800 5.1 surround system
My rig is actually in the build phase currently, installing parts as I can afford them. I wanted to get the other panel off so that I could run wiring behind it, keeping everything neat and clean. I will be using all 7 fans once I get the beast up and running, as I want to keep as cool as possible!!
No-Name - The Name That You Can Trust
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote