Need fast help lads

[Merlin4458]

meapual it works with 512 put in b1 slot but the other 512 has to go into a1 slot but the pin is in the way

On the pic munkey pasted that metal clip goes in to card so if i took that pin out i dont reacon it would move much?

what u guys thinnk

[autopilot]

Surely those long thumb screws would be easily replaced by some normal shorter ones.

[Merlin4458]

yeh but where from , if i take the screw out then notice it lifting up i can put back on with no probs right?

[drunknmunky]

That would mean the copper heatsink losing contact with the core, meaning if you put it back on the contact might not be so good, meaning the temps go up. so you would have to reapply the thermal compund.

[autopilot]

Should be fine. I don't know what size screws they are though. Long shot, but try a case one???

[Merlin4458]

update lads, the screw thing has a massive head on it, so i took it of thinking the whole screw would come out, but it didnt, the screw is still in there and its somehow holding it all in place, and my ram fits in by about half a mm, and im not exaggerating. Will get pics tm and show u.