Page 2 of 2 FirstFirst 12
Results 17 to 21 of 21

Thread: Need a good PSU suggestions? :)

  1. #17
    Ravens Nest
    Guest
    Right i've recieved the 450W CWT + SATA Quiet Dual Fan AMD/P4 App Active Fan Control Active PFC.

    450W PSU to me and you.

    Here are my reading for it, to see what everyone thinks about them.. (They come from motherboard monitor 5)

    +-------------------------------------------------------------------------+
    |Total number of readouts: 69 CPU Speed: 1756 MHz |
    |Running from: 13/11/2003 11:30:06 until: 13/11/2003 11:40:44 |
    +-----------------------------+----------+----------+----------+----------+
    |Sensor | Current | Low | High | Average |
    +-----------------------------+----------+----------+----------+----------+
    |Case | 35° C | 35° C | 35° C | 35° C |
    |CPU | 41° C | 41° C | 42° C | 41° C |
    |Sensor 3 | 0° C | 0° C | 0° C | 0° C |
    |Core 0 | 1.58 V | 1.58 V | 1.60 V | 1.59 V |
    |Core 1 | 1.68 V | 1.66 V | 1.70 V | 1.68 V |
    |+3.3 | 2.64 V | 2.62 V | 2.64 V | 2.63 V |
    |+5.00 | 4.89 V | 4.87 V | 4.89 V | 4.89 V |
    |+12.00 | 12.34 V | 12.28 V | 12.40 V | 12.35 V |
    |-12.00 | -12.68 V | -12.77 V | -12.68 V | -12.69 V |
    |-5.00 | -5.04 V | -5.04 V | -5.04 V | -5.04 V |
    |Fan 1 | 1814 RPM | 1804 RPM | 1834 RPM | 1820 RPM |
    |Fan 2 | 0 RPM | 0 RPM | 0 RPM | 0 RPM |
    |Fan 3 | 0 RPM | 0 RPM | 0 RPM | 0 RPM |
    +-----------------------------+----------+----------+----------+----------+

  2. #18
    Ravens Nest
    Guest
    Left it slightly longer this time and added Fan for CPU speed which i forgot before..

    +-------------------------------------------------------------------------+
    |Total number of readouts: 308 CPU Speed: 1756 MHz |
    |Running from: 13/11/2003 12:11:44 until: 13/11/2003 13:02:45 |
    +-----------------------------+----------+----------+----------+----------+
    |Sensor | Current | Low | High | Average |
    +-----------------------------+----------+----------+----------+----------+
    |Case | 95° F | 95° F | 96° F | 95° F |
    |CPU | 104° F | 104° F | 111° F | 105° F |
    |Sensor 3 | 32° F | 32° F | 32° F | 32° F |
    |Core 0 | 1.60 V | 1.58 V | 1.60 V | 1.59 V |
    |Core 1 | 1.68 V | 1.66 V | 1.70 V | 1.68 V |
    |+3.3 | 2.64 V | 2.62 V | 2.66 V | 2.63 V |
    |+5.00 | 4.89 V | 4.84 V | 4.89 V | 4.88 V |
    |+12.00 | 12.34 V | 12.22 V | 12.40 V | 12.36 V |
    |-12.00 | -12.68 V | -12.85 V | -12.68 V | -12.71 V |
    |-5.00 | -5.04 V | -5.04 V | -5.04 V | -5.04 V |
    |Fan 1 | 3792 RPM | 3792 RPM | 3924 RPM | 3843 RPM |
    |Fan 2 | 1795 RPM | 1785 RPM | 1939 RPM | 1848 RPM |
    |Fan 3 | 0 RPM | 0 RPM | 0 RPM | 0 RPM |
    +-----------------------------+----------+----------+----------+----------+
    Last edited by Ravens Nest; 13-11-2003 at 02:07 PM.

  3. #19
    Banned
    Join Date
    Jul 2003
    Location
    House without a red door in Birmingham
    Posts
    1,595
    Thanks
    0
    Thanked
    0 times in 0 posts
    How quiet is it and how does it compare to other PSUs? In terms of the rails you should use the mobo BIOS or a prog specific to your mobo rather than trust a 'Jack of all trades' like MBM. I doubt the reported voltages are correct. How stable is your system, what spec and how o/c'ed?

  4. #20
    Ravens Nest
    Guest
    Im not overclocking at the moment (was earlier though) i have my rig as follows :-

    Athlon XP2200+ (Thoroughbred A) at 133FSB
    Epox 8RDA+ motherboard
    2 X 512MB Twinmos 2700 DDR
    Radeon 9700np
    DVD
    CDRW
    IBM 120GXP HD 100GB
    Floppy drive
    2 X 8cm fans
    1 X system blower


    What i think of the PSU is it's very quiet at the moment
    (dont know if i'll be saying the same in the summer)

    Well compared to my Generic it is heavier has 2 fans instead of one, same colour (aluminium) except the grills they are gold

    Compared to my Q-TEC it looks very similiar except the Q-tec is gold coloured all over and is a little smaller.
    CWT Homepage is
    http://www.cwt.com.tw/

    Here's a picture of it and the details..
    http://www.cwt.com.tw/CwtEng/product...cwt-450bdp.htm

    Here are my rails from the BIOS
    Vcore 1.60-1.69
    Vdimm 2.62
    +5V 4.89V
    +12V 12.34V
    Vdd 1.60
    Vbat 3.05-3.12
    5VSB 5.01V
    -12V 12.69
    -5V 5.04


    And here's the results from the official Epox 8RDA+ software

    Vdd:1600,
    VCore:1680,
    Vdimm:2640,
    +5V:4892,
    +12V:12342,
    -12V:12692,
    -5V:5049,
    Vbat:3104,
    5VSB:5018

    Have noticed my CPU fan is more powerful than before, the Q-tec must not have give it enough juice..(is supposed to be 550W)

  5. #21
    Ravens Nest
    Guest
    Oh forgot the CWT has a power switch at the back but the Q-tec didnt, cant tell if it's a rebadged Antec or not though..

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •