AB9 Pro Flash to bios 17, Wont Boot, Nothing! Help!

[seany187]

I just flashed my AB9 Pro motherboard to the latest BIOS and it said it was successful, asked me to reboot, and now my computer wont boot, I get a combination of C1(with beeping) to 8.7s with stuttered beeping.

After resetting BIOS and battery, I can get it to boot once sorta, I get to C1 and I hear everything turning on correctly, then suddenly I get 9.8 and 9.9 and it turns off, tries to turn back on and I get C1 again with beeping. Everything was working great until I got the new flash and now I can't get it to boot, no screen, no nothing.

Is it possible to revert to the previous BIOS in this condition? I read through the manual and found nothing? is my board toast due to a BIOS update. Please help what can I do!?

[BUFF]

after you cleared CMOS did you reset the RAM voltage?
Try with 1 DIMM only & set it to whatever Crucial recommend (probably ~2.0V).

[seany187]

I have already cleared CMOS, no luck? How do I clear voltage?

I popped the ram into another PC, one ram chip isn't working from my pair. I took the good ram chip and pop it into AB9 Pro, same errors. I bought a new AB9 Pro from newegg :-( its on its way, this mobo isn't even a year old so depressing. Any other ideas before I open my new one from newegg.

Thanks,
Sean