Aw9d-max Start Up Probs

[deano2726]

ok its a new build just put every thing in, powerd it up and i get lights and cpu fans, then the fans stop after 10 or so seconds the lights stay on and i get nothing on the screan at all. the post code display shows the number 25 on the board, i have taken all drives out reseated the graphics card tried the ram in all slots and each stick on its own but with no luck tried resetting the ccmos no luck there
any one got any ideas would b great

Abit AW9D-MAX Intel 975X (Socket 775) PCI-Express DDR2
Intel Core 2 Duo E6600 "LGA775 Conroe" 2.40GHz
Crucial Ballistix 2GB (2x1GB) DDR2 PC2-5300C3 667MHz Dual Channel Kit
HIS ATI Radeon X1950 Pro ICEQ 3 V2 TURBO SILENT Heatpipe 512MB GDDR3 TV-Out/Dual DVI (PCI-Express
Antec P190 Gaming Case - 1200 Watt Neo Link PSU

[BUFF]

25 is usually gfx related.
The card is fully inserted?
Do you have the 6-pin cable connected to the gfx card?

Do you have another gfx card that you can try?

[gilgamesh]

25 is usually gfx related.
The card is fully inserted?
Do you have the 6-pin cable connected to the gfx card?

Do you have another gfx card that you can try?

yep all of the above


gilgamesh

[deano2726]

yea the card is fully inserted and the 6pin is conected to the card and no i dont have another pci exp card to try in it and my other pc does not take pci exp cards which kind of makes me stuck

[ABIT Sean]

Remove the card and power up the motherboard. If the post code stays on 25 then its a motherboard fault. The post codes carry on to 7F or FF then you will know the card is causing the issue.

[deano2726]

yea it still does the same with the card out so must b the board will have to rma it thanks for the help guys