Hi,

Im facing this weird issue.
My config:

E7200 3Ghz@Stock
ABit IP35P
2x 1GB Kingston PC2-6400
XFX 8800GT AD 700-1900-999
CM 600W
Luminous 1KVA

So i OC to 316x9.5@1.212v, FSB: DRAM->1:1 in the bios
Everythings working fine and even after a shutdown and restart everythings fine.

But once I switch off the main power from either the SMPS or the UPS, the OC gets nullified although the bios still has the new OC values intact and while booting up in the post screen it says 316x9.5 something something.

And then if i go to bios it shows the OC settings and now if I exit without saving and continue CPU-Z shows a 3.0Ghz OC.

Also the PC use to sometimes abruptly power off for a few seconds while starting after the mains from the UPS had been turned on after a switch off.

Is something configured wrong or is the piece faulty, should i get a replacement?
Also the clock is working fine, so i guess the CMOS battery is okay, yea?

regards
47