Abit IP35 Pro XE Bios 11 Problems

[Drosophil3000]

I have an Abit IP35 Pro XE with the 1.1 bios and a 7300

At first I thought I got the 1.0 bios and that I'd have to flash it because I couldn't get half multipliers (that doesn't really matter since the 7300 has 10x), but the bios id is 05/26/2008-P35-W627DHG-6A79OA1OC-11

The problem is that the temperature is always 37 C for both cores and 32 C for CPU. I've tried Everest, Realtemp, Coretemp, HWMonitor - same results

Any suggestions?

[Lvcoyote]

So whats the problem?? Will the temps rise above those readings when the CPU is stressed?? If so then your thermal sensors are stuck reading below that mark. Its a very common thing on C2D's, I have the same thing with my E8600. Use Prime96 to stress both cores, if the temp rises past the levels you mention then dont worry about it.

[Drosophil3000]

They don't rise, they don't drop. They're just stuck there no matter what the load is.

[dexstar]

Use real temp, it will tell you if your sensors are stuck or not!