tagan easycon 580 connections help please

[maximus_desimus]

Hi all
i have a tagan easycon 580 psu and a asus a8n-sli deluxe board

1,which 12v connection do i use the p4 or the p4+ seperate cable it has its own conection on the psu the p4 is inside the psu next to the 20/24 pin power cable...
2,where do i screw the ground/rtn cable to in the manual it says to a screw fitting on your mother board if near any components check for short circuts,

can i screw it to the case instead ,do i really need to conect it it has a rubber cover over it...
thanks for any help with these

Maximus

[OmarSantiago]

There are two for the 4-pin 12v cable but one is covered with little red caps: don't use that just use the other one. The grounding cable you need to remove the coverfirst: remove one of the motherboard mounting screws, pop it onto the grounding cable and re-attach it to the board. It's entirely optional if you want to do this though and if you don't, leave the cover on.

[maximus_desimus]

THANKS MATE
NOW I CAN FINISH MY BUILD
mAX

[maximus_desimus]

HI
sorry for caps

when you say motherboard mounting screw you dont mean the copper standoff the board sits on do you

thanks for any more
help

cheers
Maximus

[megatron]

Any mounting whole is a ground, just attach this thing under a screw that holds the motherboard to the copper standoff.