Internal card reader/Audio hub Connections

[Sean777]

Hi,i have this Internal card reader/Audio/USB hub and for the life of me cant figure out how to connect it to the motherboard,the usb side is easy enough and i think i have found the front audio pinouts but the card readerwires well actualy all wires are not in a block they are all single and the card reader wires have letters like this on them XTPBIP 3 others are along the same lines one is GND and other has 12V amongst the letters which must be live but in what order do these plug onto a usb pinout???? any ideas would be great thanks.

[killie99]

what motherboard do you have? Should show you in the manual for your MB how to wire it up.

[d3fiant]

should be simple, the USB and the card reader will use internal USB headers on the motherboard. The audio will use the standard audio headers on the mobo. Pins should follow the standard but sometimes dont. Post wot mobo u have like killie said, also what card reader

USB header on motherboeard, *=pins
246810
*****
****
1357

1 VCC
3 Negative Data Channel0
5 Postive Data Channel0
7 Ground
2 VCC
4 Negative Data Channel1
6 Positive Data Channel1
8 Ground
10 No connection

Front Panel Audio header on motherboard *=pins

246 10
*** *
*****
13579

Jumpers should be over pins 5+6 and 9+10, take these off to enable front panel audio and connect as follows

1 Audio Mic
2 ground
3 audio mic bias
4 VCC
5 speaker out right channel
6 speaker out right channel return
7 x
8 no pin
9 speaker out left channel
10 speaker out left channel return