hi guys, i have the yellow corsair PSU 520watts i htink. will this be enough to power the GAINWARD GTX 285 1GB 2x DVI OUTPUTS??
i have one SSD drive, one HDD, one DVD drive and a couple noctua fans.
sorry in a hurry to buy lol
hi guys, i have the yellow corsair PSU 520watts i htink. will this be enough to power the GAINWARD GTX 285 1GB 2x DVI OUTPUTS??
i have one SSD drive, one HDD, one DVD drive and a couple noctua fans.
sorry in a hurry to buy lol
Is it branded? Sorry I can't read. Yes it will be fine
Last edited by dirky; 27-11-2010 at 02:16 PM. Reason: cant read
Yes it will be enough. Corsair is a good brand.
yep esp with only a dual core cpu
HX = modular
TX = non-modular
if your psu is non-modular then it's probably the TX550w still it should say on the side in BIG letters
[rem IMG]https://i69.photobucket.com/albums/i45/pob_aka_robg/Spork/project_spork.jpg[rem /IMG] [rem IMG]https://i69.photobucket.com/albums/i45/pob_aka_robg/dichotomy/dichotomy_footer_zps1c040519.jpg[rem /IMG]
Pob's new mod, Soviet Pob Propaganda style Laptop.
"Are you suggesting that I can't punch an entire dimension into submission?" - Flying squirrel - The Red Panda Adventures
Sorry photobucket links broken
vincent.m (30-11-2010)
Thanks for the replies guys. Can always reply on the great folk here to help a brother out..
I'm gonna get the gtx 275 from a guy on here.. Am thinking of adding am after mkt Coleridge. Any recommendations?
It is the modular one..
I'm running a GTX275 with Q6600 (3.4ghz) in my Magma rig (in sig)
When I ran some test it was ~350w under load using a plug in meter.
Cavalier-X: Biostar TP45-HP ¦ E4600@3.1ghz - Xigmatek Red Scorpion (OCZ Freeze) ¦ OCZ ReaperX 2x2gb (792mhz @ 4-4-4--12) ¦ Xigmatek NRP-MC651 ¦
Palit 8800gt ¦ X-fi Fatal1ty Gamer ¦ Coolermaster Cavalier 3 (Silver/Windowed) ¦
Poseidon Magma: MSI P45 Zilent ¦ E6300@3.0ghz - Coolermaster Hyper 212 (MX-2) ¦ Corsair 2x2gb (880mhz @ 5-5-5-15) ¦ Corsair HX450w ¦
xfx 9600gt Alphadog edition (780/1950/1000) ¦ X-fi Gamer ¦ Gigabyte Poseiden ¦
Cavalier-X: Biostar TP45-HP ¦ E4600@3.1ghz - Xigmatek Red Scorpion (OCZ Freeze) ¦ OCZ ReaperX 2x2gb (792mhz @ 4-4-4--12) ¦ Xigmatek NRP-MC651 ¦
Palit 8800gt ¦ X-fi Fatal1ty Gamer ¦ Coolermaster Cavalier 3 (Silver/Windowed) ¦
Poseidon Magma: MSI P45 Zilent ¦ E6300@3.0ghz - Coolermaster Hyper 212 (MX-2) ¦ Corsair 2x2gb (880mhz @ 5-5-5-15) ¦ Corsair HX450w ¦
xfx 9600gt Alphadog edition (780/1950/1000) ¦ X-fi Gamer ¦ Gigabyte Poseiden ¦
Personally I'd not bother with an aftermarket cooler, esp if it's the stock gtx275 cooler, nvidia tend to over engineer their stock coolers (well they did, not so sure about some of the newer cards) and the gtx275 ran cool for the 2xx series
[rem IMG]https://i69.photobucket.com/albums/i45/pob_aka_robg/Spork/project_spork.jpg[rem /IMG] [rem IMG]https://i69.photobucket.com/albums/i45/pob_aka_robg/dichotomy/dichotomy_footer_zps1c040519.jpg[rem /IMG]
Pob's new mod, Soviet Pob Propaganda style Laptop.
"Are you suggesting that I can't punch an entire dimension into submission?" - Flying squirrel - The Red Panda Adventures
Sorry photobucket links broken
vincent.m (02-12-2010)
hi huys, thanks for the reply/ i am planning to buy a card from a guy tomorrow the GTX 260 for 85.
you fuys think that its a food price?
also the plastic shell that covers the heat sink, i was planning on removing it so that the heatsink is exposed. good or bad??
gtx260 for £85 is bad value for money nowadays. You should try and haggle down to £55-£60.
Cavalier-X: Biostar TP45-HP ¦ E4600@3.1ghz - Xigmatek Red Scorpion (OCZ Freeze) ¦ OCZ ReaperX 2x2gb (792mhz @ 4-4-4--12) ¦ Xigmatek NRP-MC651 ¦
Palit 8800gt ¦ X-fi Fatal1ty Gamer ¦ Coolermaster Cavalier 3 (Silver/Windowed) ¦
Poseidon Magma: MSI P45 Zilent ¦ E6300@3.0ghz - Coolermaster Hyper 212 (MX-2) ¦ Corsair 2x2gb (880mhz @ 5-5-5-15) ¦ Corsair HX450w ¦
xfx 9600gt Alphadog edition (780/1950/1000) ¦ X-fi Gamer ¦ Gigabyte Poseiden ¦
I bought the gtx 260 and it is in very god condition and doesn't heat up as much as the 8800gtx. Cant wait to sit down and play with it later. My only worry is that it looked hard to take the case off to clean as the screws are under the stickers.. Thanks for the help guys..
Don't take the plastic cover off, esp with the stock cooler the plastic cover also have a guide channel, a blower works by spinning the air and letting the centrifugal force throw it out sideways, it works in the same way as a centrifugal pump
It relies on the guide channel to keep the air spinning and being pushed in the right direction.
If you removed the cover you'd be left with this
Without the guide the blower would move less air and very weakly out in all directions and almost none would be pushed through the coolers fins.
[rem IMG]https://i69.photobucket.com/albums/i45/pob_aka_robg/Spork/project_spork.jpg[rem /IMG] [rem IMG]https://i69.photobucket.com/albums/i45/pob_aka_robg/dichotomy/dichotomy_footer_zps1c040519.jpg[rem /IMG]
Pob's new mod, Soviet Pob Propaganda style Laptop.
"Are you suggesting that I can't punch an entire dimension into submission?" - Flying squirrel - The Red Panda Adventures
Sorry photobucket links broken
vincent.m (06-12-2010)
Pob thanks for the reply. I have been using the card and its not as powerful as I thought. At 24 inch its a little laggy guess it will have to do..
There are currently 1 users browsing this thread. (0 members and 1 guests)