Show Us Your Workspace/Desk

[Dooms]

[ubiquity]

Dooms, out of interest, is that the Ikea drawers that you can use as a stand for the table-top?

And if so, is the table top itself from Ikea?

I wanted a longer table so got a cheap one from ikea and its truly terrible, makes my mic wobble when I type and has a centre piller I am always kicking

[Bhavv]

I now call this setup Wlack and Bhite (excuse the mess, new desk and room / house by the end of the year so not tidying until the move):







Build log / specs / more pics:

https://imgur.com/a/JHHiB

_________________

Main PC:

Intel I7 8700k & NZXT Kraken 43 @ 1.26v, 4.8 Ghz
Asus ROG Z370-I Gaming
Gigabyte GTX 1080 Ti OC @ 2050 / +600 vram
2x16 Gb Crucial Ballistix Sport @ 1.45v, 2900 Mhz 13-18-18-30-1T (middle timings due to double sided modules, but the cheapest 32 Gb dual channel kit I found)
EVGA T2 1000w PSU (overkill but it used to power SLI GTX 980 Tis)
2x6 Tb Seagate Barracuda Pros in Raid 1
2x1 Tb Samsung Evo 840 SSDs in Raid 0
512 Gb Crucial MX300 M.2 SSD boot drive

Back up PC:

Intel Pentium G4560 & spare Antec Kuhler 620
Asrock H170m itx/ac
2x4 Gb Crucial Ballistix Sport @ 1.35v, 2400 Mhz 11-11-11-28-1T (non Z memory OC, but limited to the XMP profile for the mx frequency)
XFX 850w black edition spare PSU (overkill too but my old / spare PSU I kept so put it in here)
128 Gb & 512 Gb Crucial M4 spare SSDs (didnt want to sell them because I paid a lot more than they are now worth, so used them towards this build)

_________________

Thermaltake Core V1 cases in both black and white, best case ever for just £40.
Asus Rog Swift 1440p main monitor, Acer G24 1200p second monitor currently.

I also have an old 19" sony x black 1280x1024 monitor lying around, after moving out the Acer & Sony will both be used with the G4560, and I'll be getting a 21:9 3440x1440 monitor for the main build and using the Rog Swift in portrait mode with it.

[Spreadie]

My workstation at home:



Dell XPS 15 9570 plus an Aorus GTX 1070 Gaming Box

[Hoonigan]

Had a big change around. Gotten shot of the ultrawide because it was hopeless for gaming on. Instead rocking an ASUS ROG PG279Q. Swapped out the corner desk too and opted for a straight desk; was getting a sore neck from the 1300mm span of the two monitors and the curved desk.

[MrRockliffe]

SETUP

What do you use on top of your ALEX drawers to rest the work top on?

[r86x]

I'm sure my ALEX drawers came with small rubber pads that I could place on the top to stop the worktop slipping about. They might have been the same ones you put on the back of the drawers to dampen the noise.

[Hoonigan]

So, after getting rid of my old ultrawide, I missed all the extra pixels, so I've had another swap about. Got myself the Acer Predator Z35P.

G-Sync
3440 x 1440
120Hz
35"
1800R Curvature

It's lovely.

Now using the ASUS ROG Swift PG279Q in portrait mode for Discord and websites. We'll see if I get a sore neck with this arrangement.

[CountStex]

On a day were I was updating a couple of family members laptops.

[kristapsl]

[alvarop]

I will make a mac lego

[paolalopez118]

Hello!!! I have a Siragon all-in-one desktop PC, it has 4 ram and 500GB of internal disk. It has a Windows 10 plus operating system and the processor is T3i

[MLyons]

New setup for when we slowly have people back in the office again. I'm now downstairs in a room on my own attached to the studio we use for filming and testing.

[Jonj1611]

Yes I bought a curved monitor, enjoy it so far

[Ciber]

My computer desk in my study little bit tidied but still with some untidy papers etc. It's in the middle of a long term renewal. When we moved house my desk got damaged so I got a new desk from IKEA 3 years ago. I dropped our old printer while it was stored in the garage so we got a new one of those and I was glad as the old printer was just a lot of bother to use. Last year I built a new PC build which feels like I'm still building it as I just added two arctic F14 silent fans and a Noctua NH-U12s CPU cooler and I'm still tinkering with the RAM settings and thinking about changing that.

Taking this photo has reminded me my mouse pad is ancient and too big so I need to look into a good new cloth pad ASAP! The chair is knackered and will maybe be next. New speakers are on the list and maybe a new amplifier or powered speakers. My Gale G20s and Amptastic Mini-T are fine but I want better. New screen maybe next year although my old and great 275T is still doing well and I'm waiting for a reasonably priced 1440p 144hz 30" or similar screen to be made.


gif hosting

[maxmememax]

One day I'll go wireless and sort out the grossness