Im just not having any luck at all lately.
So, swapped the footlong GX2 for the 7950 GX2 and headed home to build it today.
Thing is, i cannot get the machine to Post, and im certainly not new to this.
Basically everything in the system powers on, but there is no display to the monitor....the 7900GX2 was the same for the record, so i dont think its Vid Card related.
I have checked and reseated the CPU 5 times, removed all unneeded hardware, swapped the ram in its slots, left only one stick in etc etc. I have also had the system out of the case and onto an anti-static bag to ensure no Shorts were being caused by the case.
I have also tried a second power supply.
The symptoms are fairly straight forward. No display to the monitor (tried 2, on both DVI-outs), no error beeps from the motherboard and no "im ok" beep that you would expect at startup.
Im leaning towards the motherboard being the cause of fault here, but i do not have another to test with.
Im obviously going to have to call Scan at some point to speak to them about this, but i wanted to know if anyone had any ideas??
Spec:
Conroe 6300
Intel D975XBX Motherboard revision 304
2x1gig OCZ Gold DDR2 6400
XFX 7950GX2
Enermax Liberty 500w (also tried Antec trupower 430w)
Dell 2405 TFT.
I have run out of ideas guys, any help that you can provide would be greatfully received.
Thanks,