N4100Pro Config Issues/Questions

[smckdwn989]

So I made the mistake this morning of enabling jumbo frames on the WLAN without realized my router doesn't support it. Finally was able to reset to default and prevent panic.

I have various questions when it comes to configuring my N4100Pro to use jumbo frames for LAN. Right now the device is connected from WLAN to router and LAN to PC, but I can't seem to get the PC to recognize the device. How do I set this up? My PC has two gigabit ethernet ports (ans supports it on a number of options), so I assume I can enable jumbo frames for the LAN portion. Can anyone walk me through this?

Also I am a bit concerned about shutting my NAS down, as my initial Raid 5 build died when I powered back up. I assume this isn't normal, but am worried about this happening again.
Edit/Delete Message

[Thecus - Ivan]

Dear smckdwn989,

To connect your PC with NAS via LAN, you may either enable the DHCP server on LAN and let the NAS
assisign IP to your PC, or you can set your PC on the same range as your LAN IP and type in the IP address to access the NAS.

Please go to our Esupport and submit a ticket and also provide us with your config.bin for our tech support team to assist you with regards to your other issues.

You can download your config bin under System-ConfigMgnt-download

_____________________________

Official Thecus Support Representative

[supremebull]

Hello all,

Sorry to hijack the thread, but may I know which torrent client is the DLM2 module using? Right now BT does not work for me as most trackers reject the torrent client in DLM2. Thanks.