Abit FP-IN9 SLI Problems?

[vhero]

The boards monitoring software has been nothing but trouble since I got the board it beeps when i restart the thing and I start up the monitoring software ABIT EQ to find one of the voltages has the limits range listed as 0.00v-0.00v which is obviously why its warning me. However had a problem earlier with the system not booting so ran a test using Everest and posted my results here can somebody look them over and tell me if I need a new board?? I am building a new system anyways but should I scrap this one or keep?
Also is ther any way to fix the voltage problem? right now I got Abit EQ to mute but obviously the software cannot mute the board until windows has started and this is a real annoyance..

Field Value
Sensor Properties
Sensor Type Winbond W83627DHG (ISA 290h)
GPU Sensor Type Analog Devices ADT7473 (NV-I2C 2Eh)
Motherboard Name Abit FP-IN9 SLI
Chassis Intrusion Detected No

Temperatures
Motherboard 45 °C (113 °F)
CPU 72 °C (162 °F)
CPU #1 / Core #1 75 °C (167 °F)
CPU #1 / Core #2 74 °C (165 °F)
PWM 61 °C (142 °F)
GPU 78 °C (172 °F)
GPU Memory 70 °C (158 °F)
GPU Ambient 63 °C (145 °F)
SAMSUNG HD400LD 46 °C (115 °F)
MAXTOR STM3500320AS 50 °C (122 °F)
WDC WD10EACS-00D6B1 38 °C (100 °F)

Cooling Fans
CPU 3125 RPM
System 927 RPM
GPU 4902 RPM (40%)

Voltage Values
CPU Core 1.28 V
+3.3 V 3.25 V
+12 V 12.27 V
+5 V Standby 4.92 V
VTT 1.19 V
North Bridge Core 1.18 V
DIMM 1.84 V
GPU Vcc 3.27 V

[vhero]

Just did a PC dusting by god did it need it and temps dropped to
Field Value
Sensor Properties
Sensor Type Winbond W83627DHG (ISA 290h)
GPU Sensor Type Analog Devices ADT7473 (NV-I2C 2Eh)
Motherboard Name Abit FP-IN9 SLI
Chassis Intrusion Detected No

Temperatures
Motherboard 28 °C (82 °F)
CPU 44 °C (111 °F)
CPU #1 / Core #1 47 °C (117 °F)
CPU #1 / Core #2 47 °C (117 °F)
PWM 42 °C (108 °F)
GPU 55 °C (131 °F)
GPU Memory 46 °C (115 °F)
GPU Ambient 40 °C (104 °F)
SAMSUNG HD400LD 33 °C (91 °F)
MAXTOR STM3500320AS 36 °C (97 °F)
WDC WD10EACS-00D6B1 35 °C (95 °F)

Cooling Fans
CPU 1480 RPM
System 402 RPM
GPU 3596 RPM (30%)

Voltage Values
CPU Core 1.13 V
+3.3 V 3.26 V
+12 V 12.34 V
+5 V Standby 4.95 V
VTT 1.19 V
North Bridge Core 1.18 V
DIMM 1.84 V
GPU Vcc 3.29 V


still got the problem with Abit EQ showing wrong voltage limits though..

[BUFF]

you are using the right version for the mobo?
which particular voltage is the problem?

you can always use another utility rather than Eq ...

[vhero]

you are using the right version for the mobo?
which particular voltage is the problem?

you can always use another utility rather than Eq ...

Yeah I am but the problem isnt really the software for windows I think its the actual boards internal monitoring hardware. As Like I said i need that software to stop the motherboard from beeping like crazy. I got the software from the motherboards support page.



here's my problem I guess the internal hardware is doing the same thing as the software. Its beeping because of them limits no? Also the battery underneath is flashing? Could that mean something?