µGuru Clock compatibility

[b00sfuk]

Hi, is there a master list of what version of the clock/panel is compatible with what current motherboard?

I ask as I'm thinking of upgrading my AN8 (with silver GC02 clock) to a current intel board and want to check which clocks are supported. I'd like to keep my current one but think this is unlikely, I've seen the newer (GC-03) but it is much more difficult to read (smaller cluttered characters - you can't just glance for a temp/voltage). Also the panel is a less favoured option as the PC sits under my desk.

I've searched the ABIT website but most information on this is quite old and not definitive. I find the clock really useful so I hope it is still being developed for newer boards.

Thanks

[BUFF]

imo the hardware side will work as it's a straight feed but if you go for a currnet uGUru board (AB9, AW9D etc.) which use the 3rd generation uGuru chip the software for email alerts etc. may not work.

[b00sfuk]

It is the hardware feed I'm interested in. As long as I can power on/off and see all temps/voltages/speeds I'm happy. Though would the guruclock utility run (and which version) to configure what is shown/cycled? I guess it will be a bit of trial and error on any later board when I get it (probably either an AB9 or IN9). Buying the later version would be the best bet for compatibility with later boards but as I said the display is inferior in my view.

The email alerts & other software utilities etc. I don't use.

[ABIT Sean]

The main problem is the guru clock 03 is it has built in audio which uses a AC97 connector and most of the newer boards require HD audio.

If you just want to monitor temps, Fan speeds, voltages etc then all versions will work.

[b00sfuk]

Thanks, good news, I much prefer the clarity of the GC-02 display.