Abit IN9 32X-MAX / AirPace WiFi problem

[Flanno]

When I do a cold boot or if I go into standby and resume, xp seems to loose my airpace wifi adaptor...no sign of it in devicemanager. 1 reboot later and it's back. Can reproduce 100% of the time. Tried my trusty Netgear usb wifi adaptor..no issue. Tried an asus wifi pci card...no issue.

Anyone seen this problem ? Anyone actually using the wifi adaptor that came with this board.

Is there something in the airpace settings I can change to fix this ?

[ABIT Sean]

This issue is resolved with the updated driver.
Visit the abit global website.

[Flanno]

Thanks Sean.
Sorry for being dumb but I cannot seem to find it anywhere on the abit global site ?

<edit>Doh..found it...
http://www2.abit.com.tw/page/en/mult...RODINFO=Driver
</edit>

[Flanno]

Well driver at the link above does squat. Still have problems coldbooting getting xp to detect the card.

[ABIT Sean]

Did the new drivers fix the standby issue?

[Xptweaker]

Sean a friend of mine got the problem that he can only run his memory at ddr2-400 .... he tested ddr2-667 ... crashes at windows bootscreen ... ddr2-800 crashes also

he got cellshock ddr2-1000 ram and g.skill ddr2-800 GBHZ both won't work

[ABIT Sean]

Check the DDR2 Voltages. Should be set between 2.0v - 2.3v depending on the memory.

[Xptweaker]

he got 2,25 .... doesn't work .... we checked also 2,3 ... doesnt work

this is his 2nd board with the same issue

390 fsb cpu and unlinked ddr2-1000 works

above 390 freeze

on NB is a 40mm fan installed , temps are fine

[Flanno]

Did the new drivers fix the standby issue?

Yes...the card seems to be detected now on every boot ok...but had to reinstall the drivers multiple times to get it working reliablly. However the airpace card is a little unreliable in day to day use. XP can loose the device settings at any point, and you have to reboot. It seems the uguru microprocessor in system devices can randomly dissapear !!