Computer Case/Mods Gallery

[no_numb]

heres my pc and modded keyboard
i'll add more pictures when i add more stuff to my pc

check these out

no_numb

[xaserII]

this is my rig.
http://webpages.charter.net/jlegocki/

[paradidle]

Blue Things...

[Howard]

A few updates both inside and outside:

[PMM]

Surprised i've never posted my case here, bit dated now was built initially
late 2002.

[Howard]

Yet more updates:

[flop|s]

Check out my website for further info and pics.

[Knoxville]

Very impressive, and very good for keeping beer cool at lan's i'd imagine

[Howard]

I'm gonna stop upgrading now

[whitewulfe]

Okay, here's a few pics of my rig, although the modding isn't finished yet, as you guys can probably tell...



That big gaping hole will be replaced by some wire mesh (painted black) the instant the weather gets decent again....



As is quite obvious, I'm missing a case window right now... The side and top windows have been etched (and will be tinted the instant I can find a spraybottle), and you can sorta see the top window.... Yes, I know my side panel isn't on all the way. The cathodes are both 12" Sunbeam reds, gonna be another two in there, because things don't light up so brightly due to the painted interior...

I'd provide linkage to the actual log my work's on, but I don't know if linking to another comp site is allowed or not...

Sorry about the desk thingy being in the way...

[please boot..]

This is my recently built clear case. It is based around an Asus A7N8X Deluxe M/B fitted with an XP2800+ CPU and Wet and Chilly Chips Watercooling. It started with LED fans and a cold cathode tube till I discovered Madlights, now it sits on top of my desk flashing away like a Christmas tree. The Madlights have literally thousands of flashing combinations, a new one everyday.
Other parts are, Antec true power 430w PSU, 512 mb Corsair DDR ram, Asus Ti 4200 Graphics. 120 gb and 40 gb hdd`s ( Samsung and Maxtor) Lit-on dvd r/rw and cdr/rw and the ubiquitous, now redundant floppy.
The case is an Akasa Acrylic, and is really a superb unit with holes for 5 80mm case fans. The watercooling ensures it runs pretty cool, and not too noisy.

Ive attached a link to my photobox site below where I have stored the pictures. I tried to attach a picture, but it wouldnt work!! I`ll try later.

Link is http://www.photobox.co.uk/public/det...c_album=683205

allan

[Rukee]

Three Vapochill units in one case. A LS, XE, and PE all wired together to run perfectly with the power switch.
The LS is on the CPU, the XE on the GPU and the PE on the northbridge.
Got the window kits installed and it`s up and running. Right now with a slight OC on the cpu and a heavy OC on the FX5950u (475 stock to 583 now) it`s running CPU @ -38.0c, GPU @ -28.5c, NB @ -27.5c

[0blivion]

Here's mine

[DomA]

Only got some dark shots for now, and i've got a few cables need tidying since installing the water...







Dom

[redbird]

[ikonia]

check you PM's chopper