Currently have a GB 8IK1100 Rev 2.1, two 80Gb sata drives in raid 1, thats ok, but when in the bios there is no option to bot from SCSI.

So i selected the 1st boot device as the cdrom, installed 2003 server & the intel raid drivers at the same time.

PC reboots, windows loads, all ok

Install a SCSI card, pc boots, it loads the sata controller, then the scsi controller then the Intel raid controller stops & says invalid media.

I have tried allocating the SCSI card a new ID & lun but no luck.

Does anyone have any ideas as i need to use SCSI for the tape backup.

Thanks